| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152 |
- {
- "id": "julia",
- "name": "Julia",
- "version": 2,
- "inherits": "fdmprinter",
- "metadata": {
- "visible": true,
- "author": "Ultimaker",
- "manufacturer": "Fracktal",
- "category": "Other",
- "file_formats": "text/x-gcode",
- "platform_offset": [ 0, 0, 0]
- },
- "overrides": {
- "machine_start_gcode": {
- "default_value": " ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {infill_sparse_density}\n ;metric values\n M107\n G28\n G29\n G90 ;absolute positioning\n G92 E0; reset extruder distance\n G1 Z5 F300 ;move nozzle up 5mm for safe homing\n G1 X0 Y0 Z0 F5000; move nozzle to home\n M300 S600P200\n M300 S800 P200\n M190 S{material_bed_temperature} ;Uncomment to add your own bed temperature line\n M109 S{material_print_temperature} ;Uncomment to add your own temperature line\n M82 ;set extruder to absolute mode\n M107 ;start with the fan off\n G1 Z15.0 F{speed_travel} ;move the platform down 15mm\n G92 E0 ;zero the extruded length\n G1 F200 E3 ;extrude 3mm of feed stock\n G92 E0 ;zero the extruded length again\n G1 F{speed_travel}\n ;Put printing message on LCD screen\n M117 Printing...\n"
- },
- "machine_end_gcode": {
- "default_value": " M104 S0 ;extruder heater off\n M140 S0 ;heated bed heater off (if you have it)\n G91 ;relative positioning\n G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning\n"
- },
- "material_bed_temperature": { "default_value": 100 },
- "layer_height": { "default_value": 0.2 },
- "support_angle": { "default_value": 30 },
- "infill_overlap": { "default_value": 30 },
- "layer_height_0": { "default_value": 0.2 },
- "speed_print": { "default_value": 80 },
- "speed_wall_0": { "default_value": 30 },
- "speed_travel": { "default_value": 150 },
- "brim_line_count": { "default_value": 15 },
- "skin_overlap": { "default_value": 30 },
- "prime_tower_size": { "default_value": 8.660254037844387 },
- "material_diameter": { "default_value": 1.75 },
- "bottom_thickness": { "default_value": 0.8 },
- "retraction_amount": { "default_value": 3 },
- "speed_topbottom": { "default_value": 80 },
- "material_print_temperature": { "default_value": 230 },
- "support_pattern": { "default_value": "grid" },
- "speed_infill": { "default_value": 80 },
- "infill_sparse_density": { "default_value": 10 },
- "top_thickness": { "default_value": 0.8 },
- "machine_extruder_count": { "default_value": 1 },
- "retraction_combing": { "default_value": "off" },
- "machine_heated_bed": { "default_value": true },
- "machine_center_is_zero": { "default_value": false },
- "machine_height": { "default_value": 260 },
- "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
- "machine_depth": { "default_value": 250 },
- "machine_width": { "default_value": 210 },
- "machine_name": { "default_value": "Julia V2" }
- }
- }
|
