Cura/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg

[general]
version = 4
name = Extra Fast
definition = ultimaker_s5

[metadata]
setting_version = 20
type = quality
quality_type = verydraft
weight = -2
material = generic_tough_pla
variant = AA 0.4
is_experimental = True

[values]
infill_sparse_density = 15
acceleration_print = 2000
acceleration_wall = 1500
acceleration_wall_0 = 1000
acceleration_topbottom = 1000
speed_print = 50
speed_wall = 50

cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =cool_fan_speed

material_print_temperature = =default_material_print_temperature - 5
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
material_standby_temperature = 100
material_shrinkage_percentage_xy = 100.3
material_shrinkage_percentage_z = 100.1

prime_tower_enable = False
retraction_prime_speed = =retraction_speed
skin_edge_support_thickness = =0.9 if infill_sparse_density < 30 else 0
skin_overlap = 20
top_bottom_thickness = 1.2

infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'

raft_airgap = =0.25
wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)