um_s3_aa0.4_pc_0.06mm.inst.cfg 1.2 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243
  1. [general]
  2. definition = ultimaker_s3
  3. name = Extra Fine
  4. version = 4
  5. [metadata]
  6. material = generic_pc
  7. quality_type = high
  8. setting_version = 22
  9. type = quality
  10. variant = AA 0.4
  11. weight = 1
  12. [values]
  13. brim_width = 20
  14. infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
  15. infill_wipe_dist = 0.1
  16. machine_min_cool_heat_time_window = 15
  17. machine_nozzle_cool_down_speed = 0.85
  18. machine_nozzle_heat_up_speed = 1.5
  19. material_print_temperature = =default_material_print_temperature - 20
  20. multiple_mesh_overlap = 0
  21. ooze_shield_angle = 40
  22. prime_tower_enable = True
  23. prime_tower_wipe_enabled = True
  24. raft_airgap = 0.25
  25. retraction_hop = 2
  26. retraction_hop_only_when_collides = True
  27. retraction_min_travel = 0.8
  28. speed_print = 50
  29. speed_topbottom = =math.ceil(speed_print * 25 / 50)
  30. speed_wall = =math.ceil(speed_print * 40 / 50)
  31. speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
  32. support_bottom_distance = =support_z_distance
  33. support_interface_density = 87.5
  34. support_interface_enable = True
  35. support_top_distance = =support_z_distance
  36. support_z_distance = =math.ceil(0.3/layer_height)*layer_height
  37. switch_extruder_prime_speed = 15
  38. switch_extruder_retraction_amount = 20
  39. switch_extruder_retraction_speeds = 35
  40. wall_0_inset = 0