fusion3_0.4_CPE_normal.inst.cfg 946 B

1234567891011121314151617181920212223242526272829303132333435363738394041424344
  1. [general]
  2. definition = fusion3
  3. name = Normal Quality
  4. version = 4
  5. [metadata]
  6. material = generic_cpe_175
  7. quality_type = normal
  8. setting_version = 22
  9. type = quality
  10. variant = 0.4mm Nozzle
  11. [values]
  12. adhesion_type = brim
  13. cool_fan_enabled = True
  14. cool_fan_full_layer = 60
  15. cool_fan_speed = 50
  16. cool_fan_speed_min = 15
  17. cool_min_layer_time = 11
  18. cool_min_layer_time_fan_speed_max = 100
  19. infill_overlap = 20
  20. infill_sparse_density = 30
  21. inset_direction = outside_in
  22. layer_height_0 = 0.2
  23. line_width = 0.45
  24. material_bed_temperature = 110
  25. material_flow = 100
  26. material_flow_layer_0 = 100
  27. material_print_temperature = 215
  28. retract_at_layer_change = False
  29. retraction_amount = 4
  30. retraction_combing = noskin
  31. retraction_combing_max_distance = 10
  32. retraction_speed = 115
  33. speed_print = 35
  34. speed_support = 35
  35. support_angle = 45
  36. support_enable = True
  37. support_infill_rate = 30
  38. top_bottom_thickness = 0.6
  39. wall_thickness = 0.8
  40. xy_offset_layer_0 = -0.15
  41. zig_zaggify_infill = True