Cura/resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_D.inst.cfg

[general]
version = 4
name = Accurate
definition = deltacomb_base

[metadata]
setting_version = 20
type = intent
quality_type = D020
intent_category = engineering
material = generic_petg
variant = DBE 0.40mm

[values]
jerk_wall = 5
jerk_wall_0 = =jerk_wall
jerk_wall_x = =jerk_wall
wall_thickness = =line_width * 3
top_bottom_thickness = =wall_thickness
xy_offset = =-layer_height * 0.2
xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset