um_s3_aa0.8_tpu_0.2mm.inst.cfg 1.2 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344
  1. [general]
  2. definition = ultimaker_s3
  3. name = Fast
  4. version = 4
  5. [metadata]
  6. material = generic_tpu
  7. quality_type = draft
  8. setting_version = 22
  9. type = quality
  10. variant = AA 0.8
  11. weight = -2
  12. [values]
  13. brim_width = 8.75
  14. infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
  15. machine_nozzle_cool_down_speed = 0.5
  16. machine_nozzle_heat_up_speed = 2.5
  17. material_final_print_temperature = =material_print_temperature - 10
  18. material_flow = 105
  19. material_initial_print_temperature = =material_print_temperature - 10
  20. material_print_temperature = =default_material_print_temperature - 2
  21. multiple_mesh_overlap = 0.2
  22. prime_tower_enable = True
  23. prime_tower_flow = 100
  24. retraction_count_max = 15
  25. retraction_extra_prime_amount = 0.5
  26. retraction_hop = 1.5
  27. retraction_hop_only_when_collides = False
  28. retraction_min_travel = =line_width * 2
  29. retraction_prime_speed = 15
  30. speed_print = 30
  31. speed_topbottom = =math.ceil(speed_print * 25 / 30)
  32. speed_wall = =math.ceil(speed_print * 30 / 30)
  33. speed_wall_x = =math.ceil(speed_wall * 30 / 30)
  34. support_angle = 50
  35. switch_extruder_prime_speed = 15
  36. switch_extruder_retraction_amount = 20
  37. switch_extruder_retraction_speeds = 45
  38. top_bottom_thickness = 1.2
  39. top_skin_expand_distance = =line_width * 2
  40. travel_avoid_distance = 1.5
  41. wall_0_wipe_dist = =line_width * 2