| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192 |
- [general]
- definition = leapfrog_bolt_pro
- name = Standard
- version = 4
- [metadata]
- material = leapfrog_abs_natural
- quality_type = standard
- setting_version = 22
- type = quality
- variant = Brass 0.4
- weight = 0
- [values]
- adhesion_type = brim
- brim_line_count = 14
- brim_outside_only = True
- brim_width = 8
- connect_infill_polygons = True
- cool_fan_enabled = True
- cool_fan_full_at_height = 0.5
- cool_fan_full_layer = 3
- cool_fan_speed = 30
- cool_fan_speed_0 = 0
- cool_fan_speed_max = 30
- cool_fan_speed_min = 0
- cool_min_layer_time = 5
- cool_min_layer_time_fan_speed_max = 5
- cool_min_speed = 10
- infill_before_walls = True
- infill_overlap = 0
- infill_pattern = grid
- infill_sparse_density = 20
- infill_wipe_dist = 0
- initial_layer_line_width_factor = 120
- layer_height_0 = 0.3
- line_width = 0.4
- min_infill_area = 0
- optimize_wall_printing_order = True
- prime_tower_brim_enable = True
- prime_tower_enable = True
- prime_tower_min_volume = 6
- prime_tower_position_x = 169
- prime_tower_position_y = 25
- prime_tower_size = 20
- prime_tower_wipe_enabled = True
- retract_at_layer_change = False
- retraction_amount = 2
- retraction_combing = all
- retraction_enable = True
- retraction_hop = 2
- retraction_hop_after_extruder_switch = True
- retraction_hop_after_extruder_switch_height = 2
- retraction_hop_enabled = True
- retraction_hop_only_when_collides = True
- retraction_speed = 25
- skin_outline_count = 1
- skirt_brim_minimal_length = 250
- speed_layer_0 = 25
- speed_print = 35
- speed_slowdown_layers = 1
- speed_support = 40
- speed_topbottom = 25
- speed_travel = 200
- speed_travel_layer_0 = 45
- speed_wall = 25
- speed_wall_0 = 25
- speed_wall_x = 35
- support_angle = 50
- support_bottom_stair_step_height = 0.3
- support_bottom_stair_step_width = 5
- support_connect_zigzags = False
- support_infill_rate = 20
- support_interface_enable = False
- support_join_distance = 2
- support_pattern = zigzag
- support_tower_diameter = 3
- support_tower_roof_angle = 65
- support_xy_distance = 0.7
- support_xy_distance_overhang = 0.4
- support_z_distance = 0.3
- switch_extruder_retraction_amount = 15
- switch_extruder_retraction_speeds = 20
- top_bottom_pattern = lines
- top_bottom_thickness = 0.8
- travel_avoid_other_parts = True
- travel_avoid_supports = True
- wall_0_wipe_dist = 0.2
- wall_thickness = 0.8
- z_seam_corner = hide_seam
- z_seam_type = sharpest_corner
|
