Cura/resources/definitions/weedo_base.def.json

{
    "version": 2,
    "name": "WEEDO Base",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": false,
        "author": "WEEDO",
        "manufacturer": "WEEDO",
        "file_formats": "text/x-gcode",
        "exclude_materials": [
            "3D-Fuel_PLA_PRO_Black",
            "3D-Fuel_PLA_SnapSupport",
            "bestfilament_abs_skyblue",
            "bestfilament_petg_orange",
            "bestfilament_pla_green",
            "leapfrog_abs_natural",
            "leapfrog_epla_natural",
            "leapfrog_pva_natural",
            "generic_pc_175",
            "goofoo_abs",
            "goofoo_asa",
            "goofoo_bronze_pla",
            "goofoo_emarble_pla",
            "goofoo_esilk_pla",
            "goofoo_hips",
            "goofoo_pa_cf",
            "goofoo_pa",
            "goofoo_pc",
            "goofoo_peek",
            "goofoo_petg",
            "goofoo_pla",
            "goofoo_pva",
            "goofoo_tpe_83a",
            "goofoo_tpu_87a",
            "goofoo_tpu_95a",
            "goofoo_wood_pla",
            "emotiontech_abs",
            "emotiontech_absx",
            "emotiontech_acetate",
            "emotiontech_asax",
            "emotiontech_bvoh",
            "emotiontech_copa",
            "emotiontech_hips",
            "emotiontech_nylon_1030",
            "emotiontech_nylon_1030cf",
            "emotiontech_nylon_1070",
            "emotiontech_pc",
            "emotiontech_pekk",
            "emotiontech_petg",
            "emotiontech_pla",
            "emotiontech_pla_hr_870",
            "emotiontech_pva-m",
            "emotiontech_pva-s",
            "emotiontech_tpu98a",
            "eryone_petg",
            "eryone_pla_glow",
            "eryone_pla_matte",
            "eryone_pla_wood",
            "eryone_pla",
            "eryone_tpu",
            "eSUN_PETG_Black",
            "eSUN_PETG_Grey",
            "eSUN_PETG_Purple",
            "eSUN_PLA_PRO_Black",
            "eSUN_PLA_PRO_Grey",
            "eSUN_PLA_PRO_Purple",
            "eSUN_PLA_PRO_White",
            "Extrudr_GreenTECPro_Anthracite_175",
            "Extrudr_GreenTECPro_Black_175",
            "Extrudr_GreenTECPro_Blue_175",
            "Extrudr_GreenTECPro_Nature_175",
            "Extrudr_GreenTECPro_Red_175",
            "Extrudr_GreenTECPro_Silver_175",
            "Extrudr_GreenTECPro_White_175",
            "verbatim_bvoh_175",
            "Vertex_Delta_ABS",
            "Vertex_Delta_PET",
            "Vertex_Delta_PLA",
            "Vertex_Delta_TPU",
            "chromatik_pla",
            "dsm_arnitel2045_175",
            "dsm_novamid1070_175",
            "fabtotum_abs",
            "fabtotum_nylon",
            "fabtotum_pla",
            "fabtotum_tpu",
            "fdplast_abs_tomato",
            "fdplast_petg_gray",
            "fdplast_pla_olive",
            "fiberlogy_hd_pla",
            "filo3d_pla",
            "filo3d_pla_green",
            "filo3d_pla_red",
            "imade3d_petg_green",
            "imade3d_petg_pink",
            "imade3d_pla_green",
            "imade3d_pla_pink",
            "imade3d_petg_175",
            "imade3d_pla_175",
            "innofill_innoflex60_175",
            "layer_one_black_pla",
            "layer_one_dark_gray_pla",
            "layer_one_white_pla",
            "octofiber_pla",
            "polyflex_pla",
            "polymax_pla",
            "polyplus_pla",
            "polywood_pla",
            "redd_abs",
            "redd_asa",
            "redd_hips",
            "redd_nylon",
            "redd_petg",
            "redd_pla",
            "redd_tpe",
            "tizyx_abs",
            "tizyx_flex",
            "tizyx_petg",
            "tizyx_pla_bois",
            "tizyx_pla",
            "tizyx_pva",
            "Vertex_Delta_ABS",
            "Vertex_Delta_PET",
            "Vertex_Delta_PLA_Glitter",
            "Vertex_Delta_PLA_Mat",
            "Vertex_Delta_PLA_Satin",
            "Vertex_Delta_PLA_Wood",
            "Vertex_Delta_PLA",
            "Vertex_Delta_TPU",
            "volumic_abs_ultra",
            "volumic_arma_ultra",
            "volumic_asa_ultra",
            "volumic_br80_ultra",
            "volumic_bumper_ultra",
            "volumic_cu80_ultra",
            "volumic_flex93_ultra",
            "volumic_medical_ultra",
            "volumic_nylon_ultra",
            "volumic_pekk_carbone",
            "volumic_petg_ultra",
            "volumic_petgcarbone_ultra",
            "volumic_pla_ultra",
            "volumic_pp_ultra",
            "volumic_strong_ultra",
            "volumic_support_ultra",
            "xyzprinting_abs",
            "xyzprinting_antibact_pla",
            "xyzprinting_carbon_fiber",
            "xyzprinting_colorinkjet_pla",
            "xyzprinting_flexible",
            "xyzprinting_metallic_pla",
            "xyzprinting_nylon",
            "xyzprinting_petg",
            "xyzprinting_pla",
            "xyzprinting_tough_pla",
            "xyzprinting_tpu",
            "zyyx_pro_flex",
            "zyyx_pro_pla"
        ],
        "has_machine_quality": false,
        "has_materials": true,
        "has_variants": false,
        "machine_extruder_trains": { "0": "weedo_base_extruder_0" },
        "preferred_material": "generic_pla_175",
        "preferred_quality_type": "draft"
    },
    "overrides":
    {
        "adhesion_type": { "default_value": "raft" },
        "draft_shield_dist": { "default_value": 3 },
        "infill_before_walls": { "default_value": false },
        "infill_line_width": { "value": "line_width * 1.25" },
        "infill_material_flow": { "value": "max(0, material_flow - 5)" },
        "infill_pattern": { "value": "'zigzag'" },
        "infill_sparse_density": { "default_value": 10.0 },
        "initial_layer_line_width_factor": { "default_value": 110.0 },
        "layer_0_z_overlap": { "value": 0.09 },
        "machine_acceleration": { "default_value": 3000 },
        "machine_end_gcode": { "default_value": "G92 E0\nG1 E-3 F1680 \nG28 Z F400; Get extruder out of way.\nM107 ; Turn off fan\n; Disable all extruder\nM104 T0 S0\nG90 ; Absolute positioning\nG92 E0 ; Reset extruder position\nM84 ; Turn steppers off\n" },
        "machine_heated_bed": { "default_value": true },
        "machine_max_acceleration_e": { "default_value": 1600 },
        "machine_max_acceleration_x": { "default_value": 3000 },
        "machine_max_acceleration_y": { "default_value": 3000 },
        "machine_max_acceleration_z": { "default_value": 120 },
        "machine_max_feedrate_e": { "default_value": 50 },
        "machine_max_feedrate_x": { "default_value": 200 },
        "machine_max_feedrate_y": { "default_value": 130 },
        "machine_max_feedrate_z": { "default_value": 10 },
        "machine_max_jerk_e": { "default_value": 5.1 },
        "machine_max_jerk_xy": { "default_value": 10.0 },
        "machine_max_jerk_z": { "default_value": 5 },
        "machine_min_cool_heat_time_window": { "default_value": 1200.0 },
        "machine_name": { "default_value": "WEEDO Base" },
        "machine_nozzle_cool_down_speed": { "default_value": 0.67 },
        "machine_nozzle_heat_up_speed": { "default_value": 1.8 },
        "machine_nozzle_tip_outer_diameter": { "default_value": 0.8 },
        "machine_start_gcode": { "default_value": "G28 ;Home\nG92 E0\nG1 F200 E3\nG92 E0" },
        "machine_steps_per_mm_e": { "default_value": 96 },
        "machine_steps_per_mm_x": { "default_value": 94 },
        "machine_steps_per_mm_y": { "default_value": 94 },
        "machine_steps_per_mm_z": { "default_value": 400 },
        "material_bed_temp_wait": { "default_value": false },
        "material_bed_temperature": { "maximum_value_warning": "96" },
        "material_diameter": { "default_value": 1.75 },
        "material_final_print_temperature": { "value": "material_print_temperature" },
        "material_flow": { "default_value": 95.0 },
        "material_flow_layer_0": { "default_value": 95.0 },
        "material_initial_print_temperature": { "value": "material_print_temperature" },
        "material_print_temp_wait": { "default_value": false },
        "material_print_temperature": { "maximum_value": "300" },
        "material_print_temperature_layer_0": { "value": "min(material_print_temperature + 10, 300)" },
        "material_standby_temperature": { "default_value": 175.0 },
        "prime_tower_min_volume": { "default_value": 10.0 },
        "prime_tower_size": { "default_value": 15.0 },
        "raft_airgap": { "default_value": 0.19 },
        "raft_base_fan_speed": { "value": 0.0 },
        "raft_base_speed": { "value": 20.0 },
        "raft_base_thickness": { "value": 0.3 },
        "raft_interface_speed": { "value": 33.0 },
        "raft_margin": { "default_value": 8.0 },
        "raft_surface_speed": { "value": 40.0 },
        "raft_surface_thickness": { "value": 0.25 },
        "retraction_amount": { "default_value": 3 },
        "retraction_combing": { "value": "'off'" },
        "retraction_extrusion_window": { "value": 1.0 },
        "retraction_hop_after_extruder_switch": { "default_value": false },
        "retraction_min_travel": { "value": 0.8 },
        "retraction_speed": { "default_value": 28.0 },
        "skin_outline_count": { "value": "0" },
        "skirt_brim_speed": { "value": 26.0 },
        "skirt_line_count": { "default_value": 2 },
        "speed_layer_0": { "value": 26.0 },
        "speed_prime_tower": { "value": "speed_support" },
        "speed_print": { "default_value": 70.0 },
        "speed_support": { "value": "round(speed_print * 0.82, 1)" },
        "speed_support_interface": { "value": "round(speed_support * 0.689, 1)" },
        "speed_topbottom": { "value": "round(speed_print * 0.65, 1)" },
        "speed_travel": { "value": 105.0 },
        "speed_travel_layer_0": { "value": 80.0 },
        "speed_wall": { "value": "max(5, round(speed_print / 2 - 5, 1))" },
        "speed_wall_0": { "value": "max(5, speed_wall - 5)" },
        "speed_wall_x": { "value": "speed_wall" },
        "support_angle": { "default_value": 60.0 },
        "support_connect_zigzags": { "default_value": false },
        "support_interface_density": { "default_value": 60.0 },
        "support_interface_enable": { "default_value": true },
        "support_interface_height": { "default_value": 0.8 },
        "support_interface_pattern": { "default_value": "lines" },
        "support_material_flow": { "value": "max(0, material_flow - 5)" },
        "support_z_distance": { "default_value": 0.18 },
        "switch_extruder_retraction_amount": { "value": 16.5 },
        "switch_extruder_retraction_speeds": { "default_value": 28.0 },
        "top_skin_preshrink": { "value": 0.0 },
        "wall_0_wipe_dist": { "value": 0.0 },
        "z_seam_corner": { "default_value": "z_seam_corner_any" }
    }
}