Cura/resources/definitions/snapmaker2_dual.def.json

{
    "version": 2,
    "name": "Snapmaker 2",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": false,
        "manufacturer": "Snapmaker",
        "file_formats": "text/x-gcode",
        "exclude_materials": [],
        "has_machine_quality": true,
        "has_materials": true,
        "machine_extruder_trains":
        {
            "0": "snapmaker_dual_extruder_0",
            "1": "snapmaker_dual_extruder_1"
        },
        "preferred_material": "generic_pla",
        "preferred_quality_type": "normal"
    },
    "overrides":
    {
        "default_material_print_temperature": { "default_value": 205 },
        "machine_acceleration": { "default_value": 1000 },
        "machine_buildplate_type": { "default_value": "aluminum" },
        "machine_end_gcode": { "default_value": "M104 S0 ;Extruder heater off\nM140 S0 ;Heated bed heater off\nG90 ;absolute positioning\nG92 E0 ;Retract the filament\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z{machine_height} E-1 F3000 ;move Z up a bit and retract filament even more\nG1 X0 F3000 ;move X to min endstops, so the head is out of the way\nG1 Y{machine_depth} F3000 ;so the head is out of the way and Plate is moved forward" },
        "machine_extruder_count": { "default_value": 2 },
        "machine_heated_bed": { "default_value": true },
        "machine_max_acceleration_e": { "default_value": 1000 },
        "machine_max_acceleration_x": { "default_value": 1000 },
        "machine_max_acceleration_y": { "default_value": 1000 },
        "machine_max_acceleration_z": { "default_value": 1000 },
        "machine_name": { "default_value": "Snapmaker" },
        "machine_nozzle_size": { "default_value": 0.4 },
        "machine_start_gcode": { "default_value": "M104 S{material_print_temperature_layer_0} ;Set Hotend Temperature\nM140 S{material_bed_temperature_layer_0} ;Set Bed Temperature\nG28 ;home\nG90 ;absolute positioning\nG1 X-10 Y-10 F3000 ;Move to corner \nG1 Z0 F1800 ;Go to zero offset\nM109 S{material_print_temperature_layer_0} ;Wait for Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ;Wait for Bed Temperature\nG92 E0 ;Zero set extruder position\nG1 E20 F200 ;Feed filament to clear nozzle\nG92 E0 ;Zero set extruder position" },
        "material_bed_temp_prepend": { "default_value": false },
        "material_diameter": { "default_value": 1.75 },
        "material_print_temp_prepend": { "default_value": false },
        "retraction_amount": { "default_value": 5 },
        "retraction_speed": { "default_value": 60 }
    }
}