Cura/resources/definitions/snakeoil_standard_base.def.json

{
    "version": 2,
    "name": "SnakeOil Standard Base",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": false,
        "author": "Chip",
        "manufacturer": "SnakeOilXY",
        "file_formats": "text/x-gcode",
        "first_start_actions": [ "MachineSettingsAction" ],
        "has_machine_quality": true,
        "machine_extruder_trains": { "0": "snakeoil_standard_extruder_0" },
        "preferred_material": "generic_abs",
        "preferred_quality_type": "normal"
    },
    "overrides":
    {
        "acceleration_enabled": { "default_value": true },
        "acceleration_layer_0": { "value": 10000 },
        "acceleration_print": { "default_value": 15000 },
        "acceleration_roofing": { "value": 10000 },
        "acceleration_travel_layer_0": { "value": 10000 },
        "acceleration_wall_0": { "value": 7500 },
        "adhesion_type": { "default_value": "skirt" },
        "alternate_extra_perimeter": { "default_value": true },
        "bridge_fan_speed_2": { "resolve": "max(cool_fan_speed, 50)" },
        "bridge_fan_speed_3": { "resolve": "max(cool_fan_speed, 20)" },
        "bridge_settings_enabled": { "default_value": true },
        "bridge_wall_coast": { "default_value": 10 },
        "cool_fan_full_at_height": { "value": "resolveOrValue('layer_height_0') + resolveOrValue('layer_height') * max(1, cool_fan_full_layer - 1)" },
        "cool_fan_full_layer": { "value": 4 },
        "cool_min_layer_time": { "default_value": 15 },
        "cool_min_layer_time_fan_speed_max": { "default_value": 20 },
        "gantry_height": { "value": 30 },
        "infill_before_walls": { "default_value": false },
        "infill_enable_travel_optimization": { "default_value": true },
        "jerk_roofing": { "value": 10 },
        "jerk_wall_0": { "value": 10 },
        "layer_height_0": { "resolve": "max(0.2, min(extruderValues('layer_height')))" },
        "line_width": { "value": "machine_nozzle_size * 1.125" },
        "machine_acceleration": { "default_value": 1500 },
        "machine_depth": { "default_value": 165 },
        "machine_end_gcode": { "default_value": "END_PRINT" },
        "machine_endstop_positive_direction_x": { "default_value": true },
        "machine_endstop_positive_direction_y": { "default_value": true },
        "machine_endstop_positive_direction_z": { "default_value": false },
        "machine_feeder_wheel_diameter": { "default_value": 7.5 },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [-35, 65],
                [-35, -50],
                [35, -50],
                [35, 65]
            ]
        },
        "machine_heated_bed": { "default_value": true },
        "machine_height": { "default_value": 165 },
        "machine_max_acceleration_x": { "default_value": 15000 },
        "machine_max_acceleration_y": { "default_value": 15000 },
        "machine_max_acceleration_z": { "default_value": 250 },
        "machine_max_feedrate_e": { "default_value": 120 },
        "machine_max_feedrate_z": { "default_value": 40 },
        "machine_max_jerk_e": { "default_value": 60 },
        "machine_name": { "default_value": "SNAKEOIL STANDARD" },
        "machine_start_gcode": { "default_value": ";Simple\nSTART_PRINT EXTRUDER_TEMP={material_print_temperature_layer_0} BED_TEMP={material_bed_temperature_layer_0}\n;Or with custom bed mesh area\n;START_PRINT EXTRUDER_TEMP={material_print_temperature_layer_0} BED_TEMP={material_bed_temperature_layer_0} AREA_START=%MINX%,%MINY% AREA_END=%MAXX%,%MAXY% FILAMENT_TYPE={material_type}" },
        "machine_steps_per_mm_x": { "default_value": 160 },
        "machine_steps_per_mm_y": { "default_value": 160 },
        "machine_steps_per_mm_z": { "default_value": 800 },
        "machine_use_extruder_offset_to_offset_coords": { "value": false },
        "machine_width": { "default_value": 165 },
        "material_diameter": { "default_value": 1.75 },
        "meshfix_maximum_resolution": { "default_value": 0.01 },
        "min_infill_area": { "default_value": 5.0 },
        "minimum_polygon_circumference": { "default_value": 0.2 },
        "optimize_wall_printing_order": { "default_value": true },
        "retraction_amount": { "default_value": 0.8 },
        "retraction_combing": { "value": "'noskin'" },
        "retraction_combing_max_distance": { "default_value": 10 },
        "retraction_hop": { "default_value": 0.2 },
        "retraction_hop_enabled": { "default_value": true },
        "retraction_prime_speed":
        {
            "maximum_value_warning": 130,
            "value": "math.ceil(retraction_speed * 0.4)"
        },
        "retraction_retract_speed": { "maximum_value_warning": 130 },
        "retraction_speed":
        {
            "default_value": 35,
            "maximum_value_warning": 130
        },
        "roofing_layer_count": { "value": 1 },
        "skirt_brim_minimal_length": { "default_value": 550 },
        "speed_layer_0": { "value": "math.ceil(speed_print * 0.25)" },
        "speed_roofing": { "value": "math.ceil(speed_print * 0.33)" },
        "speed_slowdown_layers": { "default_value": 4 },
        "speed_topbottom": { "value": "math.ceil(speed_print * 0.33)" },
        "speed_travel":
        {
            "maximum_value_warning": 501,
            "value": 300
        },
        "speed_travel_layer_0": { "value": "math.ceil(speed_travel * 0.4)" },
        "speed_wall": { "value": "math.ceil(speed_print * 0.33)" },
        "speed_wall_0": { "value": "math.ceil(speed_print * 0.33)" },
        "speed_wall_x": { "value": "math.ceil(speed_print * 0.66)" },
        "travel_avoid_other_parts": { "default_value": false },
        "wall_line_width": { "value": "machine_nozzle_size" },
        "wall_overhang_angle": { "default_value": 75 },
        "wall_overhang_speed_factor": { "default_value": 50 },
        "zig_zaggify_infill": { "value": true }
    }
}