| 123456789101112131415161718192021222324252627282930313233 |
- {
- "version": 2,
- "name": "Rigid3D Zero",
- "inherits": "rigid3d_base",
- "metadata":
- {
- "visible": true,
- "preferred_material": "generic_pla_175",
- "preferred_quality_type": "standard",
- "quality_definition": "rigid3d_base"
- },
- "overrides":
- {
- "gantry_height": { "value": 20 },
- "machine_center_is_zero": { "default_value": false },
- "machine_depth": { "default_value": 250 },
- "machine_end_gcode": { "default_value": " ; -- END GCODE --\n G1 X0 Y230 ; Get extruder out of way.\n M107 ; Turn off fan\n G91 ; Relative positioning\n G0 Z20 ; Lift extruder up\n T0\n G1 E-1 ; Reduce filament pressure\n M104 T0 S0 ; Turn ectruder heater off\n G90 ; Absolute positioning\n G92 E0 ; Reset extruder position\n M140 S0 ; Disable heated bed\n M84 ; Turn steppers off\n ; -- end of END GCODE --\n" },
- "machine_head_with_fans_polygon":
- {
- "default_value": [
- [-40, -15],
- [-40, 60],
- [30, -15],
- [30, 60]
- ]
- },
- "machine_heated_bed": { "default_value": false },
- "machine_height": { "default_value": 190 },
- "machine_name": { "default_value": "Rigid3D Zero" },
- "machine_start_gcode": { "default_value": " ; -- START GCODE --\n G21\n G28 ; Home extruder\n G29 ; Autolevel bed\n M107 ; Turn off fan\n G90 ; Absolute positioning\n M82 ; Extruder in absolute mode\n G92 E0 ; Reset extruder position\n ; -- end of START GCODE --\n\n" },
- "machine_width": { "default_value": 250 }
- }
- }
|
