Cura/resources/definitions/maker_made_300x.def.json

{
    "version": 2,
    "name": "Maker Made 300x",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": true,
        "author": "DragonJe",
        "manufacturer": "Maker Made",
        "file_formats": "text/x-gcode",
        "has_machine_quality": false,
        "has_materials": true,
        "has_variants": false,
        "machine_extruder_trains": { "0": "maker_made_300x_extruder_0" },
        "platform_offset": [
            0,
            0,
            0
        ],
        "preferred_material": "generic_pla",
        "preferred_quality_type": "normal"
    },
    "overrides":
    {
        "acceleration_enabled": { "value": false },
        "acceleration_roofing": { "value": 3000 },
        "adhesion_type": { "value": "'skirt'" },
        "alternate_extra_perimeter": { "value": false },
        "bottom_layers": { "value": 3 },
        "bottom_thickness": { "value": 0.6 },
        "carve_multiple_volumes": { "value": false },
        "cool_fan_enabled": { "value": true },
        "cool_fan_full_at_height": { "value": 0.32 },
        "cool_fan_speed": { "value": 100 },
        "cool_fan_speed_0": { "value": 0 },
        "cool_lift_head": { "value": false },
        "default_material_bed_temperature": { "value": 50 },
        "default_material_print_temperature": { "value": 220 },
        "fill_outline_gaps": { "value": true },
        "gantry_height": { "value": "30" },
        "gradual_infill_steps": { "value": 0 },
        "gradual_support_infill_steps": { "value": 0 },
        "infill_before_walls": { "value": false },
        "infill_multiplier": { "value": 1 },
        "infill_overlap": { "value": 10 },
        "infill_sparse_density": { "value": 20 },
        "infill_support_enabled": { "value": false },
        "infill_wall_line_count": { "value": 0 },
        "infill_wipe_dist": { "value": 0.1 },
        "initial_layer_line_width_factor": { "value": 100 },
        "inset_direction": { "value": "'inside_out'" },
        "ironing_enabled": { "value": false },
        "jerk_enabled": { "value": false },
        "layer_height": { "value": 0.16 },
        "layer_height_0": { "value": 0.32 },
        "line_width": { "value": 0.4 },
        "machine_depth": { "default_value": 300 },
        "machine_end_gcode": { "default_value": "M104 S0\n M140 S0\n ;Retract the filament\n G92 E1\n G1 E-1 F300\n G28 X0 Y0\n G1 Y300 F3000 ;Move bed forward\n M84" },
        "machine_gcode_flavor": { "default_value": " RepRap (Marlin/Sprinter)" },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [-30, 34],
                [-30, -32],
                [30, -32],
                [30, 34]
            ]
        },
        "machine_heated_bed": { "default_value": true },
        "machine_height": { "default_value": 400 },
        "machine_name": { "default_value": "Maker Made 300x" },
        "machine_start_gcode": { "default_value": "G28 ;Home\n G29 ;Auto Level\n G92 E0 ;Reset Extruder\n G1 Z5.0 F3000 ;Move Z Axis up\n G1 X25 Y295.0 Z0.28 F3000.0 ;Move to extrude\n G1 X250 Y295.0 Z0.28 F1500.0 E15 ;Draw the first line\n G1 X25 Y290.0 Z0.28 F3000.0 ;Move to side a little\n G1 X250 Y290.0 Z0.28 F1500.0 E30 ;Draw the second line\n G92 E0 ;Reset Extruder\n G1 Z5.0 F3000 ;Move Z Axis up" },
        "machine_width": { "default_value": 300 },
        "material_bed_temperature": { "value": 50 },
        "material_diameter": { "default_value": 1.75 },
        "material_final_print_temperature": { "value": 220 },
        "material_flow": { "value": 100 },
        "material_initial_print_temperature": { "value": 220 },
        "material_print_temperature_layer_0": { "value": 220 },
        "max_skin_angle_for_expansion": { "value": 90 },
        "meshfix_extensive_stitching": { "value": false },
        "meshfix_keep_open_polygons": { "value": false },
        "meshfix_union_all": { "value": true },
        "meshfix_union_all_remove_holes": { "value": false },
        "multiple_mesh_overlap": { "value": "0.16" },
        "optimize_wall_printing_order": { "value": false },
        "retract_at_layer_change": { "value": false },
        "retraction_amount": { "value": 5 },
        "retraction_combing": { "value": "'infill'" },
        "retraction_count_max": { "value": 90 },
        "retraction_enable": { "value": true },
        "retraction_extra_prime_amount": { "value": 0 },
        "retraction_extrusion_window": { "value": 5 },
        "retraction_hop_enabled": { "value": false },
        "retraction_min_travel": { "value": 0.8 },
        "retraction_speed": { "value": 45 },
        "roofing_layer_count": { "value": 1 },
        "skin_no_small_gaps_heuristic": { "value": true },
        "skin_outline_count": { "value": 1 },
        "skin_overlap": { "value": 5 },
        "skirt_gap": { "value": 3 },
        "skirt_line_count": { "value": 2 },
        "speed_layer_0": { "value": 10 },
        "speed_print": { "value": 50 },
        "speed_slowdown_layers": { "value": 2 },
        "speed_travel": { "value": 150 },
        "speed_travel_layer_0": { "value": 50 },
        "support_angle": { "value": "50" },
        "support_bottom_enable": { "value": false },
        "support_bottom_stair_step_height": { "value": 0.3 },
        "support_bottom_stair_step_width": { "value": 5.0 },
        "support_brim_enable": { "value": true },
        "support_brim_line_count": { "value": 5 },
        "support_enable": { "value": true },
        "support_fan_enable": { "value": false },
        "support_infill_rate": { "value": "15 if support_enable else 0" },
        "support_join_distance": { "value": 2.0 },
        "support_offset": { "value": 0.2 },
        "support_pattern": { "value": "'grid'" },
        "support_roof_density": { "value": 45 },
        "support_roof_enable": { "value": true },
        "support_roof_height": { "value": 0.45 },
        "support_roof_pattern": { "value": "'lines'" },
        "support_tower_diameter": { "value": 3 },
        "support_tower_roof_angle": { "value": "65" },
        "support_type": { "value": "'everywhere'" },
        "support_wall_count": { "value": "1 if (support_structure == 'tree') else 0" },
        "support_xy_distance": { "value": 0.7 },
        "support_xy_distance_overhang": { "value": 0.2 },
        "support_z_distance": { "value": 0.2 },
        "switch_extruder_retraction_amount": { "value": 16 },
        "switch_extruder_retraction_speeds": { "value": 20 },
        "top_bottom_pattern": { "value": "'lines'" },
        "top_bottom_pattern_0": { "value": "'lines'" },
        "top_bottom_thickness": { "value": 0.6 },
        "top_layers": { "value": 5 },
        "top_thickness": { "value": 0.8 },
        "travel_avoid_other_parts": { "value": true },
        "travel_retract_before_outer_wall": { "value": false },
        "wall_0_inset": { "value": 0 },
        "wall_0_wipe_dist": { "value": 0.2 },
        "wall_line_width_0": { "value": 0.4 },
        "wall_thickness": { "value": 0.8 },
        "xy_offset": { "value": 0 },
        "zig_zaggify_infill": { "value": false },
        "zig_zaggify_support": { "value": false }
    }
}