Cura/resources/definitions/lnl3d_base.def.json

{
    "version": 2,
    "name": "LNL3D Printer",
    "inherits": "fdmprinter",
    "metadata":
    {
        "author": "LNL3D",
        "manufacturer": "LNL3D",
        "file_formats": "text/x-gcode",
        "first_start_actions": [ "MachineSettingsAction" ],
        "has_machine_quality": true,
        "has_materials": true,
        "has_variants": true,
        "machine_extruder_trains":
        {
            "0": "lnl3d_extruder_left",
            "1": "lnl3d_extruder_right"
        },
        "preferred_material": "generic_pla",
        "preferred_quality_type": "standard",
        "preferred_variant_name": "0.4mm Nozzle",
        "quality_definition": "lnl3d_base",
        "variants_name": "Nozzle Size"
    },
    "overrides":
    {
        "acceleration_print": { "value": 500 },
        "acceleration_roofing": { "enabled": "acceleration_enabled and roofing_layer_count > 0 and top_layers > 0" },
        "acceleration_travel": { "value": 500 },
        "acceleration_travel_layer_0": { "value": "acceleration_travel" },
        "adaptive_layer_height_variation": { "value": 0.04 },
        "adaptive_layer_height_variation_step": { "value": 0.04 },
        "adhesion_type": { "value": "'skirt'" },
        "brim_width": { "value": 4 },
        "cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" },
        "cool_min_layer_time": { "value": 10 },
        "fill_outline_gaps": { "value": false },
        "infill_overlap": { "value": 30.0 },
        "infill_pattern": { "value": "'lines'" },
        "infill_wipe_dist": { "value": 0.0 },
        "initial_layer_line_width_factor": { "default_value": 130.0 },
        "jerk_print": { "value": 8 },
        "jerk_travel": { "value": "jerk_print" },
        "jerk_travel_layer_0": { "value": "jerk_travel" },
        "layer_height_0": { "default_value": 0.2 },
        "machine_acceleration": { "value": 500 },
        "machine_end_gcode": { "default_value": "M104 T0 S0                   ;left extruder heater off\nM104 T1 S0                   ;right extruder heater off\nM140 S0                      ;heated bed heater off (if you have it)\nG91                          ;relative positioning\nG1 E-1 F300                  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0                    ;move X/Y to min endstops, so the head is out of the way\nM84                          ;steppers off\nG90                          ;absolute positioning" },
        "machine_extruder_count": { "default_value": 2 },
        "machine_heated_bed": { "default_value": true },
        "machine_max_acceleration_e": { "value": 5000 },
        "machine_max_acceleration_x": { "value": 500 },
        "machine_max_acceleration_y": { "value": 500 },
        "machine_max_acceleration_z": { "value": 100 },
        "machine_max_feedrate_e": { "value": 80 },
        "machine_max_feedrate_x": { "value": 500 },
        "machine_max_feedrate_y": { "value": 500 },
        "machine_max_feedrate_z": { "value": 10 },
        "machine_max_jerk_e": { "value": 5 },
        "machine_max_jerk_xy": { "value": 10 },
        "machine_max_jerk_z": { "value": 0.4 },
        "machine_start_gcode": { "default_value": "G21              ;metric values\nG90              ;absolute positioning\nM82              ;set extruder to absolute mode\nM107             ;start with the fan off\nG28              ;move to min endstops\nG92 E0           ;reset extruder\nG1 E15 F1500     ;move extruder 15mm\nG1 Z15.0 F3000   ;move the header up 15mm\nM117 printing... ;LCD message" },
        "material_diameter": { "default_value": 1.75 },
        "material_final_print_temperature": { "value": "material_print_temperature" },
        "material_initial_print_temperature": { "value": "material_print_temperature" },
        "meshfix_maximum_resolution": { "value": "0.25" },
        "meshfix_maximum_travel_resolution": { "value": "meshfix_maximum_resolution" },
        "minimum_interface_area": { "value": 10 },
        "minimum_support_area": { "value": "2 if support_structure == 'normal' else 0" },
        "optimize_wall_printing_order": { "value": "True" },
        "prime_tower_brim_enable": { "value": true },
        "prime_tower_wipe_enabled": { "default_value": false },
        "raft_airgap": { "default_value": 0.2 },
        "raft_margin": { "default_value": 2 },
        "retraction_combing": { "value": "'off' if retraction_hop_enabled else 'noskin'" },
        "retraction_count_max": { "value": 100 },
        "retraction_extrusion_window": { "value": 4 },
        "retraction_hop": { "value": 0.2 },
        "retraction_hop_after_extruder_switch_height": { "value": 0.0 },
        "retraction_hop_enabled": { "value": "False" },
        "retraction_prime_speed":
        {
            "maximum_value": 200,
            "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')"
        },
        "retraction_retract_speed":
        {
            "maximum_value": 200,
            "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')"
        },
        "retraction_speed":
        {
            "maximum_value": 200,
            "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')"
        },
        "skin_overlap": { "value": 25 },
        "skirt_line_count": { "value": 2 },
        "speed_layer_0": { "value": 20.0 },
        "speed_prime_tower": { "value": "speed_topbottom" },
        "speed_support": { "value": "speed_wall_0" },
        "speed_support_interface": { "value": "speed_topbottom" },
        "speed_travel": { "value": "80.0 if speed_print < 61 else 120.0 if speed_print > 100 else speed_print * 1.5" },
        "speed_travel_layer_0": { "value": "80 if speed_layer_0 < 21 else 100 if speed_layer_0 > 30 else speed_layer_0 * 5" },
        "speed_wall_x": { "value": "speed_wall" },
        "speed_z_hop": { "value": 5 },
        "support_angle": { "value": "math.floor(math.degrees(math.atan(line_width/1.4/layer_height)))" },
        "support_brim_enable": { "value": true },
        "support_brim_width": { "value": 4 },
        "support_infill_rate": { "value": "0 if support_enable and support_structure == 'tree' else 20" },
        "support_interface_density": { "value": 33.333 },
        "support_interface_enable": { "value": true },
        "support_interface_height": { "value": "layer_height * 4" },
        "support_interface_pattern": { "value": "'grid'" },
        "support_pattern": { "value": "'zigzag'" },
        "support_xy_distance": { "value": "wall_line_width_0 * 2" },
        "support_xy_distance_overhang": { "value": "wall_line_width_0" },
        "support_xy_overrides_z": { "value": "'xy_overrides_z'" },
        "support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height*2" },
        "switch_extruder_retraction_amount": { "value": 8.0 },
        "switch_extruder_retraction_speeds": { "default_value": 60.0 },
        "top_bottom_thickness": { "value": "layer_height_0 + layer_height * 4" },
        "travel_avoid_other_parts": { "value": false },
        "travel_avoid_supports": { "value": true },
        "travel_retract_before_outer_wall": { "value": true },
        "wall_0_wipe_dist": { "value": 0.0 },
        "wall_thickness": { "value": "line_width * 2" },
        "z_seam_corner": { "value": "'z_seam_corner_weighted'" },
        "z_seam_type": { "value": "'back'" },
        "zig_zaggify_infill": { "value": true }
    }
}