Cura/resources/definitions/kossel_mini.def.json

{
    "version": 2,
    "name": "Kossel Mini",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": true,
        "author": "Claudio Sampaio (Patola)",
        "manufacturer": "Johann",
        "file_formats": "text/x-gcode",
        "platform": "kossel_platform.3mf",
        "machine_extruder_trains": { "0": "kossel_mini_extruder_0" },
        "platform_offset": [
            0,
            -0.25,
            0
        ]
    },
    "overrides":
    {
        "machine_center_is_zero": { "default_value": true },
        "machine_depth": { "default_value": 170 },
        "machine_end_gcode": { "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG28 ;Home all axes (max endstops)\nM84 ;steppers off\nG90 ;absolute positioning" },
        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
        "machine_heated_bed": { "default_value": true },
        "machine_height": { "default_value": 200 },
        "machine_shape": { "default_value": "elliptic" },
        "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home all axes (max endstops)\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." },
        "machine_width": { "default_value": 170 }
    }
}