Cura/resources/definitions/hctech_hc300-m2h.def.json

{
    "version": 2,
    "name": "HCTECH_HC300-M2H",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": true,
        "author": "HCTECH",
        "manufacturer": "HCTECH",
        "file_formats": "text/x-gcode",
        "platform": "hctech_hc300-m2h.3mf",
        "has_machine_quality": false,
        "machine_extruder_trains":
        {
            "0": "hctech_hc300-m2h_extruder_0",
            "1": "hctech_hc300-m2h_extruder_1"
        }
    },
    "overrides":
    {
        "adhesion_type": { "default_value": "skirt" },
        "cool_fan_speed": { "value": 75 },
        "gantry_height": { "value": "55" },
        "infill_before_walls": { "value": false },
        "line_width": { "value": 0.38 },
        "machine_center_is_zero": { "default_value": false },
        "machine_depth": { "default_value": 300 },
        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-1 F2700 ;Retract a bit\nG1 Z1 E-1 F2400 ;Retract and raise Z\nG1 Z2 ;Raise Z\nG90 ;Absolute positioning\nG12 ;clean nozzle\nG1 X5 Y319 ;Return to Start Point\nM106 S0 ;Switch off part cooling fan\nM104 S0 ;turn off temperature\nM140 S0 ;turn off Heated Bed\nM84 X Y E ;Disable all steppers but Z\nM81 ;turn-off power" },
        "machine_extruder_count": { "default_value": 2 },
        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [-61, 86],
                [-61, -37],
                [85, -37],
                [85, 86]
            ]
        },
        "machine_heated_bed": { "default_value": true },
        "machine_height": { "default_value": 300 },
        "machine_name": { "default_value": "HCTECH HC300-M2H" },
        "machine_start_gcode": { "default_value": "G1 Z2 ;Raise Z\nG28 X Y ;Home XY\nT1 ;switch to right extruder\nG1 X5 Y319 F4000 ;Move to Start Position\nG92 E0 ;Reset Extruder\nG1 E20 F60 ;extrude\nM400 ;Wait move\nG92 E0 ;Reset Extruder\nG1 E-2 F2700 ;Retract\nG92 E0 ;Reset Extruder\nG1 X150 F5000 ;Clean Nozzle\nG1 X5 ;Clean Nozzle\nG1 X220 ;Repeat\nG1 X5 ;Back to start posotion\nT0 ;switch to left extruder\nG1 X5 Y319 F4000 ;Move to Start Position\nG92 E0 ;Reset Extruder\nG1 E20 F60 ;extrude\nM400 ;Wait move\nG92 E0 ;Reset Extruder\nG4 S15 ;Wait 15s\nG1 E-2 F2700; Retract\nG92 E0 ;Reset Extruder\nG1 X150 F5000 ;Clean Nozzle\nG1 X5 ;Clean nozzle\nG1 X220 ;Repeat\nG1 X5 ;Back to start position\nG28 Z ;home Z\nG29 ;Measure the bed\nM500 ;Store parameters\nG1 X0 Y300 F4000 ;Move to corner" },
        "machine_width": { "default_value": 300 },
        "material_diameter": { "default_value": 1.75 },
        "retraction_amount":
        {
            "default_value": 0.3,
            "maximum_value_warning": 2.0
        },
        "retraction_speed": { "default_value": 35 },
        "speed_print": { "default_value": 60.0 },
        "travel_avoid_distance": { "value": 1 },
        "travel_avoid_supports": { "value": true },
        "travel_retract_before_outer_wall": { "value": true }
    }
}