Cura/resources/definitions/geeetech_Mizar_S.def.json

{
    "version": 2,
    "name": "Geeetech Mizar_S (legacy)",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": true,
        "author": "Amit L",
        "manufacturer": "Geeetech",
        "file_formats": "text/x-gcode",
        "has_materials": true,
        "machine_extruder_trains": { "0": "geeetech_Mizar_S_1" }
    },
    "overrides":
    {
        "adhesion_type": { "default_value": "skirt" },
        "gantry_height": { "value": "28" },
        "layer_height": { "default_value": 0.1 },
        "layer_height_0": { "default_value": 0.15 },
        "machine_acceleration": { "default_value": 1000 },
        "machine_center_is_zero": { "default_value": false },
        "machine_depth": { "default_value": 255 },
        "machine_end_gcode": { "default_value": "G91 ;Switch to relative positioning\nG1 E-1 ;Retract filament to lower pressure\nG0 X0 Y200 ;Move hotend to left and bed forward\nM104 S0 ;Cooldown hotend\nG90 ;Switch to absolute mode\nG92 E0 ;Set extruder to zero\nM140 S0 ;Cooldown bed\nM84 ; Disable steppers" },
        "machine_extruder_count": { "default_value": 1 },
        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [-31, 31],
                [34, 31],
                [34, -40],
                [-31, -40]
            ]
        },
        "machine_heated_bed": { "default_value": true },
        "machine_height": { "default_value": 260 },
        "machine_max_acceleration_z": { "default_value": 500 },
        "machine_max_feedrate_e": { "default_value": 120 },
        "machine_max_feedrate_z": { "default_value": 12 },
        "machine_max_jerk_e": { "default_value": 2.5 },
        "machine_max_jerk_xy": { "default_value": 10 },
        "machine_max_jerk_z": { "default_value": 0.2 },
        "machine_name": { "default_value": "Geeetech Mizar_S (legacy)" },
        "machine_start_gcode": { "default_value": "G28 ; Auto home\nG1 Z15 F300 ;Move up slightly\nM107 ;Off fans\nG90 ;Switch to absolute positioning\nM82 ;Extruder absolute mode\nG92 E0 ;Set position of extruder to 0\nG0 X10 Y20 F1500 ;Move to X10 Y20 at 1500mms\nG1 Z0.8 ;Move Z to 0.8\nG1 F300 X180 E40 ;Extrude a line of filament\nG1 F1200 Z2 ;Raise Z\nG92 E0 ;Set extruder position to zero\nG28 ;Auto home" },
        "machine_width": { "default_value": 255 },
        "retraction_amount": { "default_value": 0.8 },
        "retraction_speed": { "default_value": 35 }
    }
}