geeetech_A10.def.json 2.4 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849
  1. {
  2. "version": 2,
  3. "name": "Geeetech A10",
  4. "inherits": "fdmprinter",
  5. "metadata":
  6. {
  7. "visible": true,
  8. "author": "Amit L",
  9. "manufacturer": "Geeetech",
  10. "file_formats": "text/x-gcode",
  11. "has_materials": true,
  12. "machine_extruder_trains": { "0": "geeetech_A10_1" }
  13. },
  14. "overrides":
  15. {
  16. "adhesion_type": { "default_value": "skirt" },
  17. "gantry_height": { "value": "28" },
  18. "layer_height": { "default_value": 0.1 },
  19. "layer_height_0": { "default_value": 0.15 },
  20. "machine_acceleration": { "default_value": 1000 },
  21. "machine_center_is_zero": { "default_value": false },
  22. "machine_depth": { "default_value": 220 },
  23. "machine_end_gcode": { "default_value": "G91 ;Switch to relative positioning\nG1 E-1 ;Retract filament to lower pressure\nG0 X0 Y200 ;Move hotend to left and bed forward\nM104 S0 ;Cooldown hotend\nG90 ;Switch to absolute mode\nG92 E0 ;Set extruder to zero\nM140 S0 ;Cooldown bed\nM84 ; Disable steppers" },
  24. "machine_extruder_count": { "default_value": 1 },
  25. "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
  26. "machine_head_with_fans_polygon":
  27. {
  28. "default_value": [
  29. [-31, 31],
  30. [34, 31],
  31. [34, -40],
  32. [-31, -40]
  33. ]
  34. },
  35. "machine_heated_bed": { "default_value": true },
  36. "machine_height": { "default_value": 260 },
  37. "machine_max_acceleration_z": { "default_value": 500 },
  38. "machine_max_feedrate_e": { "default_value": 120 },
  39. "machine_max_feedrate_z": { "default_value": 12 },
  40. "machine_max_jerk_e": { "default_value": 2.5 },
  41. "machine_max_jerk_xy": { "default_value": 10 },
  42. "machine_max_jerk_z": { "default_value": 0.2 },
  43. "machine_name": { "default_value": "Geeetech A10" },
  44. "machine_start_gcode": { "default_value": "G28 ; Auto home\nG1 Z15 F300 ;Move up slightly\nM107 ;Off fans\nG90 ;Switch to absolute positioning\nM82 ;Extruder absolute mode\nG92 E0 ;Set position of extruder to 0\nG0 X10 Y20 F1500 ;Move to X10 Y20 at 1500mms\nG1 Z0.8 ;Move Z to 0.8\nG1 F300 X180 E40 ;Extrude a line of filament\nG1 F1200 Z2 ;Raise Z\nG92 E0 ;Set extruder position to zero\nG28 ;Auto home" },
  45. "machine_width": { "default_value": 220 },
  46. "retraction_amount": { "default_value": 0.8 },
  47. "retraction_speed": { "default_value": 35 }
  48. }
  49. }