elegoo_neptune_3.def.json 1.5 KB

123456789101112131415161718192021222324252627282930
  1. {
  2. "version": 2,
  3. "name": "ELEGOO NEPTUNE 3",
  4. "inherits": "elegoo_base",
  5. "metadata":
  6. {
  7. "visible": true,
  8. "author": "NARUTO",
  9. "quality_definition": "elegoo_base"
  10. },
  11. "overrides":
  12. {
  13. "machine_depth": { "default_value": 235 },
  14. "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-10 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positioning\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z" },
  15. "machine_head_with_fans_polygon":
  16. {
  17. "value": [
  18. [-55, 20],
  19. [55, 20],
  20. [55, -25],
  21. [-55, -25]
  22. ]
  23. },
  24. "machine_height": { "default_value": 280 },
  25. "machine_name": { "default_value": "ELEGOO NEPTUNE 3" },
  26. "machine_start_gcode": { "default_value": ";ELEGOO NEPTUNE 3\n;M413 S0;S0=Disable power-loss recovery:S1=Enable power-loss recovery\nM220 S100 ;Set the feed speed to 100%\nG90\nG28 ;home\n;M420 S1 Z10;Uncomment to enable progressive compensation height of 10mm\nG92 E0 ;Reset Extruder\nG1 Z0.6 F100\nG1 X1.5 Y20 F5000.0 ;Move to start position\nG1 Y120.0 F600.0 E20 ;Draw the first line\nG1 X0.5 F1000.0 ;Move to side a little\nG1 Y20 F600 E40 ;Draw the second line\nG92 E0 ;Reset Extruder" },
  27. "machine_width": { "default_value": 235 },
  28. "material_bed_temperature": { "value": "default_material_bed_temperature + 10" }
  29. }
  30. }