| 1234567891011121314151617181920212223242526272829303132333435 |
- {
- "version": 2,
- "name": "Blocks RD50 - Mirror Mode",
- "inherits": "blocks_base",
- "metadata":
- {
- "visible": true,
- "platform": "blocks_rd50_platform.stl",
- "first_start_actions": [ "MachineSettingsAction" ],
- "has_machine_quality": true,
- "has_materials": true,
- "has_variants": true,
- "machine_extruder_trains":
- {
- "0": "blocks_rd50_extruder_0",
- "1": "blocks_rd50_extruder_1"
- },
- "preferred_material": "generic_pla",
- "preferred_quality_type": "normal",
- "preferred_variant_name": "ST - 0.4mm",
- "quality_definition": "blocks_base",
- "variants_name": "Print Core"
- },
- "overrides":
- {
- "machine_depth": { "default_value": 500 },
- "machine_end_gcode": { "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+1 E-1 X-20 Y-20 F6000 ;move Z up a bit and retract filament even more\nM605 S1 ; AUTO-PARK MODE\nG28 X Y ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\n" },
- "machine_extruder_count": { "default_value": 2 },
- "machine_height": { "default_value": 500 },
- "machine_name": { "default_value": "Blocks RD50 - Mirror Mode" },
- "machine_start_gcode": { "default_value": ";INITIALIZE MIRROR MODE\nM605 S1 ; AUTO-PARK MODE\nT0 ; Set tool 0\nG28 ; Home all axes\nG28 X ; Home x axes\nM605 S2 ; Set duplication mode\n; PREHEAT\nM140 S{material_bed_temperature_layer_0} ; Set Heat Bed temperature\nM104 S{material_print_temperature_layer_0} ; Set Extruder temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Heat Bed temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Extruder temperature\n;SET MIRROR MODE\nM605 S2 X622 ; Set duplication mode and nozzle offset\nG28 X\nG1 X-60 F3000\nM605 S3 X622 ; Set mirror mode and nozzle offset\nM82\nG92 E0 ; Reset Extruder\nG1 F200\nG1 E30 F200 ; Prime\nG12 ; Clean Nozzle\nG1 X125 F3000\nG92 E0 ; Reset Extruder\n" },
- "machine_width": { "default_value": 500 },
- "retraction_retract_speed": { "value": 50 }
- }
- }
|
