SV03.def.json 3.8 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364
  1. {
  2. "version": 2,
  3. "name": "Sovol-SV03 (Legacy)",
  4. "inherits": "fdmprinter",
  5. "metadata":
  6. {
  7. "visible": true,
  8. "author": "Sovol",
  9. "manufacturer": "Sovol 3D",
  10. "file_formats": "text/x-gcode",
  11. "has_machine_quality": false,
  12. "has_variants": false,
  13. "machine_extruder_trains": { "0": "SV03_extruder_0" },
  14. "preferred_quality_type": "draft"
  15. },
  16. "overrides":
  17. {
  18. "acceleration_enabled": { "value": false },
  19. "acceleration_print": { "value": 500 },
  20. "acceleration_roofing": { "enabled": "acceleration_enabled and roofing_layer_count > 0 and top_layers > 0" },
  21. "acceleration_travel": { "value": 500 },
  22. "acceleration_travel_layer_0": { "value": "acceleration_travel" },
  23. "adhesion_type": { "value": "'skirt'" },
  24. "infill_before_walls": { "value": false },
  25. "infill_overlap": { "value": 30.0 },
  26. "infill_pattern": { "value": "'lines'" },
  27. "infill_wipe_dist": { "value": 0.0 },
  28. "jerk_enabled": { "value": false },
  29. "jerk_print": { "value": 8 },
  30. "jerk_travel": { "value": "jerk_print" },
  31. "jerk_travel_layer_0": { "value": "jerk_travel" },
  32. "machine_acceleration": { "value": 500 },
  33. "machine_depth": { "default_value": 350 },
  34. "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X0 Y240 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },
  35. "machine_heated_bed": { "default_value": true },
  36. "machine_height": { "default_value": 400 },
  37. "machine_max_acceleration_e": { "value": 5000 },
  38. "machine_max_acceleration_x": { "value": 500 },
  39. "machine_max_acceleration_y": { "value": 500 },
  40. "machine_max_acceleration_z": { "value": 100 },
  41. "machine_max_feedrate_e": { "value": 50 },
  42. "machine_max_feedrate_x": { "value": 500 },
  43. "machine_max_feedrate_y": { "value": 500 },
  44. "machine_max_feedrate_z": { "value": 10 },
  45. "machine_max_jerk_e": { "value": 5 },
  46. "machine_max_jerk_xy": { "value": 10 },
  47. "machine_max_jerk_z": { "value": 0.4 },
  48. "machine_name": { "default_value": "SV03" },
  49. "machine_start_gcode": { "default_value": "M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration\nM203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate\nM204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration\nM205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\nG29 ;Automatic Leveling\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n" },
  50. "machine_width": { "default_value": 350 },
  51. "material_diameter": { "default_value": 1.75 },
  52. "material_final_print_temperature": { "value": "material_print_temperature" },
  53. "material_initial_print_temperature": { "value": "material_print_temperature" },
  54. "optimize_wall_printing_order": { "value": "True" },
  55. "retraction_amount": { "default_value": 3 },
  56. "retraction_speed": { "default_value": 50 },
  57. "skin_overlap": { "value": 10.0 },
  58. "skirt_brim_speed": { "value": "speed_layer_0" },
  59. "speed_print": { "value": 50.0 },
  60. "wall_0_wipe_dist": { "value": 0.0 },
  61. "z_seam_corner": { "value": "'z_seam_corner_weighted'" },
  62. "z_seam_type": { "value": "'back'" }
  63. }
  64. }