jb2_global_coarse.inst.cfg 2.1 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576
  1. [general]
  2. definition = imade3d_jellybox_2
  3. name = Coarse
  4. version = 4
  5. [metadata]
  6. global_quality = True
  7. quality_type = fast
  8. setting_version = 22
  9. type = quality
  10. weight = -1
  11. [values]
  12. adhesion_type = skirt
  13. bottom_thickness = =top_bottom_thickness
  14. bridge_enable_more_layers = False
  15. bridge_settings_enabled = True
  16. bridge_skin_material_flow = 85
  17. bridge_skin_speed = 20
  18. bridge_wall_material_flow = 85
  19. bridge_wall_speed = 20
  20. coasting_enable = True
  21. coasting_min_volume = 2
  22. coasting_volume = 0.032
  23. cool_fan_speed_max = =cool_fan_speed
  24. infill_before_walls = False
  25. infill_enable_travel_optimization = True
  26. infill_line_width = =round(line_width * 1.5, 2)
  27. infill_pattern = zigzag
  28. infill_sparse_density = 25
  29. layer_height = 0.3
  30. layer_height_0 = 0.3
  31. line_width = =machine_nozzle_size
  32. material_bed_temperature = =default_material_bed_temperature
  33. material_bed_temperature_layer_0 = =material_bed_temperature + 5
  34. material_print_temperature = =default_material_print_temperature
  35. material_print_temperature_layer_0 = =material_print_temperature + 5
  36. print_sequence = all_at_once
  37. retract_at_layer_change = True
  38. retraction_combing = noskin
  39. retraction_combing_max_distance = 50
  40. retraction_hop = 0.2
  41. retraction_hop_enabled = True
  42. retraction_min_travel = =machine_nozzle_size * 3
  43. retraction_retract_speed = =retraction_speed
  44. roofing_layer_count = 1
  45. skin_line_width = =line_width * 1.2
  46. skin_outline_count = 2
  47. skirt_brim_minimal_length = 100
  48. skirt_brim_speed = =speed_layer_0
  49. skirt_gap = 5
  50. skirt_line_count = 1
  51. speed_layer_0 = 20
  52. speed_roofing = 20
  53. speed_topbottom = 25
  54. speed_travel = =speed_print if magic_spiralize else 120
  55. speed_travel_layer_0 = 60
  56. support_angle = 60
  57. support_bottom_enable = False
  58. support_bottom_height = 0
  59. support_connect_zigzags = False
  60. support_enable = False
  61. support_infill_rate = 20
  62. support_interface_density = 70
  63. support_interface_enable = True
  64. support_interface_height = 2
  65. support_interface_pattern = concentric
  66. support_interface_skip_height = 0.1
  67. support_type = everywhere
  68. support_use_towers = False
  69. support_xy_distance = 0.8
  70. support_xy_distance_overhang = =machine_nozzle_size / 2
  71. support_z_distance = 0.2
  72. travel_retract_before_outer_wall = True
  73. wall_0_wipe_dist = =round(line_width * 1.2,1)