gutenberg_global_strong_quality.inst.cfg 1.2 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556
  1. [general]
  2. definition = gutenberg_base
  3. name = Strong
  4. version = 4
  5. [metadata]
  6. global_quality = True
  7. quality_type = strong
  8. setting_version = 22
  9. type = quality
  10. [values]
  11. acceleration_enabled = True
  12. acceleration_print = 15000
  13. acceleration_roofing = 10000
  14. acceleration_topbottom = 10000
  15. acceleration_travel = 15000
  16. acceleration_wall = 10000
  17. acceleration_wall_0 = 7500
  18. adhesion_type = skirt
  19. alternate_extra_perimeter = True
  20. infill_line_width = 0.5
  21. infill_pattern = gyroid
  22. infill_sparse_density = 30
  23. layer_height = 0.2
  24. layer_height_0 = 0.2
  25. optimize_wall_printing_order = True
  26. retraction_amount = 0.8
  27. retraction_combing = noskin
  28. retraction_hop = 0.2
  29. retraction_hop_enabled = True
  30. retraction_hop_only_when_collides = True
  31. retraction_speed = 35
  32. roofing_layer_count = 1
  33. skin_monotonic = True
  34. skirt_brim_speed = 45
  35. speed_infill = 150
  36. speed_layer_0 = 45
  37. speed_print = 100
  38. speed_print_layer_0 = 60
  39. speed_roofing = 100
  40. speed_topbottom = 100
  41. speed_travel = 300
  42. speed_travel_layer_0 = 100
  43. speed_wall = 100
  44. speed_wall_0 = 75
  45. speed_wall_x = 100
  46. support_angle = 46
  47. support_enable = False
  48. top_bottom_thickness = 1
  49. travel_avoid_supports = True
  50. wall_line_width = 0.45
  51. wall_line_width_0 = 0.4
  52. wall_thickness = 2.05
  53. zig_zaggify_infill = True