Cura/resources/quality/fusion3/fusion3_0.4_PLA_fine.inst.cfg

[general]
definition = fusion3
name = Fine Quality
version = 4

[metadata]
material = generic_pla
quality_type = fine
setting_version = 22
type = quality
variant = 0.4mm Nozzle

[values]
adhesion_type = skirt
cool_fan_enabled = True
cool_fan_full_layer = 70
cool_fan_speed = 100
cool_fan_speed_min = 15
cool_min_layer_time = 3
cool_min_layer_time_fan_speed_max = 65
infill_sparse_density = 60
inset_direction = outside_in
layer_height_0 = 0.2
line_width = 0.4
material_bed_temperature = 55
material_flow = 99
material_print_temperature = 220
retract_at_layer_change = False
retraction_amount = 2.5
retraction_combing = noskin
retraction_combing_max_distance = 10
retraction_speed = 55
skirt_gap = 5
speed_print = 40
speed_travel_layer_0 = 100
support_angle = 45
support_enable = True
support_infill_rate = 25
top_bottom_thickness = 0.6
wall_thickness = 0.9
zig_zaggify_infill = True