Cura/resources/quality/ultimaker3/um3_aa0.4_PETG_Fast_Print.inst.cfg

[general]
definition = ultimaker3
name = Normal
version = 4

[metadata]
material = generic_petg
quality_type = fast
setting_version = 21
type = quality
variant = AA 0.4
weight = -1

[values]
material_initial_print_temperature = =material_print_temperature - 5
material_print_temperature = =default_material_print_temperature
retraction_combing = all
speed_infill = =math.ceil(speed_print * 50 / 60)
speed_print = 60
speed_topbottom = =math.ceil(speed_print * 30 / 60)
speed_wall = =math.ceil(speed_print * 40 / 60)
speed_wall_0 = =math.ceil(speed_wall * 30 / 40)