Cura/resources/definitions/fabtotum.def.json

{
    "version": 2,
    "name": "Fabtotum Personal Fabricator",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": true,
        "author": "Fabtotum",
        "manufacturer": "Fabtotum",
        "file_formats": "text/x-gcode",
        "platform": "fabtotum_platform.3mf",
        "has_machine_quality": true,
        "has_variants": true,
        "machine_extruder_trains": { "0": "fabtotum_extruder_0" },
        "preferred_material": "fabtotum_pla",
        "preferred_variant_name": "Lite 0.4 mm",
        "supports_usb_connection": false,
        "variants_name": "Head"
    },
    "overrides":
    {
        "gantry_height": { "value": "55" },
        "infill_sparse_density": { "default_value": 24 },
        "machine_acceleration": { "default_value": 4000 },
        "machine_center_is_zero": { "default_value": false },
        "machine_depth": { "default_value": 234 },
        "machine_end_gcode": { "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300    ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-3 X+5 Y+5 F5000 ;move Z up a bit and retract filament even more\n;end of the print\nM84 ;steppers off\nG90 ;absolute positioning\nM300 S2 ;FAB bep bep (end print)" },
        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [-75, 35],
                [-75, -18],
                [18, 35],
                [18, -18]
            ]
        },
        "machine_heated_bed": { "default_value": true },
        "machine_height": { "default_value": 241.5 },
        "machine_max_acceleration_e": { "default_value": 100 },
        "machine_max_acceleration_x": { "default_value": 10000 },
        "machine_max_acceleration_y": { "default_value": 10000 },
        "machine_max_acceleration_z": { "default_value": 50 },
        "machine_max_feedrate_x": { "default_value": 250 },
        "machine_max_feedrate_y": { "default_value": 250 },
        "machine_max_feedrate_z": { "default_value": 15 },
        "machine_max_jerk_e": { "default_value": 1.0 },
        "machine_max_jerk_xy": { "default_value": 25.0 },
        "machine_max_jerk_z": { "default_value": 0.4 },
        "machine_name": { "default_value": "FABtotum Personal Fabricator" },
        "machine_start_gcode": { "default_value": ";Layer height: {layer_height}\n;Walls: {wall_thickness}\n;Fill: {infill_sparse_density}\n;Top\\Bottom Thickness: {top_bottom_thickness}\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG4 S1 ;1 millisecond pause to buffer the bep bep \nM300 S2 ;FAB bep bep (start the print, go check the oozing and skirt lines adesion) \nG4 S1 ;1 second pause to reach the printer (run fast)\nG92 E0 ;zero the extruded length \nG1 F200 E35    ;slowly extrude 35mm of filament to clean the nozzle and build up extrusion pressure \nG92 E0 ;zero the extruded length again \n;print" },
        "machine_width": { "default_value": 214 },
        "material_final_print_temperature": { "value": "material_print_temperature - 5" },
        "material_initial_print_temperature": { "value": "material_print_temperature" },
        "retraction_hop_enabled": { "default_value": false },
        "skirt_brim_minimal_length": { "default_value": 150 },
        "skirt_brim_speed": { "value": "speed_layer_0" },
        "skirt_line_count": { "default_value": 3 },
        "speed_infill": { "value": "round(speed_print * 1.05, 0)" },
        "speed_layer_0": { "value": "min(round(speed_print * 0.75, 0), 45.0)" },
        "speed_topbottom": { "value": "round(speed_print * 0.95, 0)" },
        "speed_travel": { "value": 200 },
        "speed_travel_layer_0": { "value": "round(speed_travel * 0.7, 0)" },
        "speed_wall": { "value": "speed_print" },
        "speed_wall_0": { "value": "round(speed_print * 0.9, 0)" },
        "speed_wall_x": { "value": "speed_wall" },
        "support_interface_enable": { "default_value": true },
        "support_z_distance":
        {
            "default_value": 0.2,
            "value": "min(2 * layer_height, machine_nozzle_size * 0.75)"
        },
        "top_bottom_thickness": { "default_value": 0.6 },
        "travel_avoid_distance": { "value": 1 }
    }
}