Cura/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg

[general]
version = 4
name = Normal
definition = ultimaker_s3

[metadata]
setting_version = 19
type = quality
quality_type = fast
weight = -1
material = generic_petg
variant = AA 0.4

[values]
cool_min_speed = 7
material_print_temperature = =default_material_print_temperature
material_initial_print_temperature = =material_print_temperature - 5
material_final_print_temperature = =material_print_temperature - 10
retraction_combing_max_distance = 8
speed_print = 60
speed_layer_0 = =math.ceil(speed_print * 20 / 60)
speed_topbottom = =math.ceil(speed_print * 30 / 60)
speed_wall = =math.ceil(speed_print * 40 / 60)
speed_wall_0 = =math.ceil(speed_wall * 30 / 40)

infill_pattern = triangles
speed_infill = =math.ceil(speed_print * 50 / 60)
initial_layer_line_width_factor = 100