Cura/resources/quality/goofoo/pva/goofoo_open_0.40_pva_draft.inst.cfg

[general]
definition = goofoo_open
name = Draft Quality
version = 4

[metadata]
material = goofoo_pva
quality_type = draft
setting_version = 21
type = quality
variant = 0.4mm Nozzle

[values]
adhesion_type = none
material_bed_temperature = 70
support_brim_enable = True
support_enable = True
support_infill_rate = 50
support_interface_enable = True
support_pattern = grid
wall_thickness = =line_width*2