| 123456789101112131415161718192021222324252627282930 |
- {
- "version": 2,
- "name": "Anycubic i3 Mega",
- "inherits": "fdmprinter",
- "metadata":
- {
- "visible": true,
- "author": "TheTobby",
- "manufacturer": "Anycubic",
- "file_formats": "text/x-gcode",
- "platform": "anycubic_i3_mega_platform.3mf",
- "has_machine_quality": true,
- "has_materials": true,
- "machine_extruder_trains": { "0": "anycubic_i3_mega_extruder_0" },
- "preferred_quality_type": "normal"
- },
- "overrides":
- {
- "gantry_height": { "value": "0" },
- "machine_center_is_zero": { "default_value": false },
- "machine_depth": { "default_value": 210 },
- "machine_end_gcode": { "default_value": "M104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors\nM107\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 ;Y0 ;move X/Y to min endstops, so the head is out of the way\nG1 Y180 F2000\nM84 ;steppers off\nG90\nM300 P300 S4000" },
- "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
- "machine_heated_bed": { "default_value": true },
- "machine_height": { "default_value": 205 },
- "machine_name": { "default_value": "Anycubic i3 Mega" },
- "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F{speed_travel} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{speed_travel}\nG0 Y20 F{speed_travel}\nM117 Printing...\nG5" },
- "machine_width": { "default_value": 210 }
- }
- }
|
