Cura/resources/definitions/deltacomb_dc30flux.def.json

{
    "version": 2,
    "name": "Deltacomb DC-30 Flux",
    "inherits": "deltacomb_base",
    "metadata":
    {
        "visible": true,
        "platform": "deltacomb_dc30.stl",
        "machine_extruder_trains":
        {
            "0": "deltacomb_dc30flux_extruder_0",
            "1": "deltacomb_dc30flux_extruder_1",
            "2": "deltacomb_dc30flux_extruder_2",
            "3": "deltacomb_dc30flux_extruder_3"
        },
        "preferred_variant_name": "FBE 0.40mm",
        "quality_definition": "deltacomb_base"
    },
    "overrides":
    {
        "machine_depth": { "default_value": 290 },
        "machine_end_gcode": { "default_value": ";---------------------------------------\n;Deltacomb end script\n;---------------------------------------\nG91 ;relative positioning\nG1 X8.0 E-10 F6000 ;wipe filament+material retraction\nG1 Z2 E9 ;Lift and start filament shaping\nG1 E-9\nG1 E8\nG1 E-8\nG1 E-10 F110\nG1 E-40 F5000 ; move to park position\nG28 ;home all axes (max endstops)\nM84 ;steppers off" },
        "machine_extruder_count":
        {
            "default_value": 2,
            "maximum_value": "4"
        },
        "machine_height": { "default_value": 300 },
        "machine_name": { "default_value": "Deltacomb DC-30 FLUX" },
        "machine_width": { "default_value": 290 },
        "material_final_print_temperature": { "value": "material_print_temperature" },
        "material_initial_print_temperature": { "value": "material_print_temperature" },
        "material_standby_temperature": { "value": "material_print_temperature" },
        "prime_tower_enable": { "value": "True" },
        "prime_tower_min_volume": { "value": "50" },
        "switch_extruder_retraction_amount": { "value": "0" }
    }
}