Cura/resources/variants/strateo3d_standard_12.inst.cfg

[general]
name = Standard 1.2 Experimental
version = 4
definition = strateo3d

[metadata]
setting_version = 19
type = variant
hardware_type = nozzle

[values]
machine_nozzle_id = Standard 1.2 Experimental
machine_nozzle_size = 1.2
machine_nozzle_tip_outer_diameter = 3.0
layer_height = 0.6
layer_height_0 = 0.7
prime_tower_enable = True
retract_at_layer_change = True
support_angle = 50
support_use_towers = True