Cura/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg

[general]
version = 4
name = Fine
definition = ultimaker2_plus

[metadata]
setting_version = 19
type = quality
quality_type = draft
weight = 0
material = generic_pc
variant = 0.8 mm

[values]
adhesion_type = raft
brim_line_count = 10
cool_fan_speed = 50
cool_fan_speed_min = =cool_fan_speed * 25 / 50
cool_min_layer_time = 3
infill_overlap = =0 if infill_sparse_density > 80 else 5
infill_sparse_density = 40
layer_0_z_overlap = 0.22
raft_airgap = 0.47
raft_base_line_width = 1.6
raft_interface_line_spacing = 1.8
raft_interface_line_width = 1.6
raft_margin = 15
raft_surface_line_width = 0.7
raft_surface_thickness = 0.2
speed_layer_0 = =round(speed_print * 30 / 40)
speed_print = 40
support_angle = 45
support_enable = True
support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
support_pattern = lines
support_z_distance = 0.26
top_bottom_thickness = 1.2