Cura/resources/definitions/mixware_hyper_s.def.json

{
    "name": "Hyper S",
    "version": 2,
    "inherits": "fdmprinter",
    "metadata": {
        "visible": true,
        "author": "Mixware",
        "manufacturer": "Mixware",
        "file_formats": "text/x-gcode",
        "platform": "mixware_hyper_s_platform.stl",
        "has_materials": true,
        "has_machine_quality": true,
        "preferred_material": "generic_pla",
        "preferred_quality": "coarse",
        "machine_extruder_trains": {
            "0": "mixware_hyper_s_extruder_0"
        }
    },
    "overrides": {
        "machine_name": {
            "default_value": "Hyper S"
        },
        "machine_start_gcode": {
            "default_value": "M140 S{material_bed_temperature} ; Heat bed\nM109 S{material_print_temperature} ; Heat nozzle\nM190 S{material_bed_temperature} ; Wait for bed heating\nG28 ; home all axes\nM117 Purge extruder\nG92 E0 ; reset extruder\nG1 Z5.0 F1000 ; move z up little to prevent scratching of surface\nG1 X0.1 Y20 Z0.3 F5000.0 ; move to start-line position\nG1 X0.1 Y100.0 Z0.3 F1500.0 E15 ; draw 1st line\nG1 X0.4 Y100.0 Z0.3 F5000.0 ; move to side a little\nG1 X0.4 Y20 Z0.3 F1500.0 E30 ; draw 2nd line\nG92 E0 ; reset extruder\nG1 Z5.0 F1000 ; move z up little to prevent scratching of surface"
        },
        "machine_end_gcode": {
            "default_value": "G91; relative positioning\nG1 Z1.0 F3000 ; move z up little to prevent scratching of print\nG90; absolute positioning\nG1 X0 Y200 F1000 ; prepare for part removal\nM104 S0; turn off extruder\nM140 S0 ; turn off bed\nG1 X0 Y220 F1000 ; prepare for part removal\nM84 ; disable motors\nM106 S0 ; turn off fan"
        },
        "machine_width": {
            "default_value": 300
        },
        "machine_depth": {
            "default_value": 300
        },
        "machine_height": {
            "default_value": 400
        },
        "raft_margin": {
            "default_value": 3,
            "minimum_value_warning": "0.01"
        },
        "raft_airgap": {
            "default_value": 0.24
        },
        "brim_width": {
            "default_value": 3
        },
        "machine_heated_bed": {
            "default_value": true
        },
        "material_diameter": {
            "default_value": 1.75
        },
        "top_bottom_pattern": {
            "default_value": "zigzag"
        },
        "ironing_line_spacing": {
            "default_value": 0.4
        },
        "ironing_pattern": {
            "default_value": "concentric"
        },
        "skin_no_small_gaps_heuristic": {
            "default_value": false
        },
        "retraction_hop_enabled": {
            "default_value": false
        },
        "support_enable": {
            "default_value": true
        },
        "support_type": {
            "default_value": "buildplate"
        },
        "support_angle": {
            "default_value": 60
        },
        "support_pattern": {
            "default_value": "zigzag"
        },
        "support_infill_rate": {
            "value": 15
        },
        "gantry_height": {
            "value": 25
        },
        "machine_max_feedrate_x": {
            "default_value": 500
        },
        "machine_max_feedrate_y": {
            "default_value": 500
        },
        "machine_max_feedrate_z": {
            "default_value": 10
        },
        "machine_max_feedrate_e": {
            "default_value": 50
        },
        "machine_max_acceleration_x": {
            "default_value": 500
        },
        "machine_max_acceleration_y": {
            "default_value": 500
        },
        "machine_max_acceleration_z": {
            "default_value": 100
        },
        "machine_max_acceleration_e": {
            "default_value": 500
        },
        "machine_acceleration": {
            "default_value": 500
        },
        "machine_max_jerk_xy": {
            "default_value": 10
        },
        "machine_max_jerk_z": {
            "default_value": 0.4
        },
        "machine_max_jerk_e": {
            "default_value": 5
        },
        "acceleration_print": {
            "default_value": 1000
        },
        "jerk_print": {
            "default_value": 10
        },
        "acceleration_enabled": {
            "default_value": false
        },
        "jerk_enabled": {
            "default_value": false
        },
        "speed_print": {
            "default_value": 40.0
        },
        "optimize_wall_printing_order": {
            "default_value": "True"
        },
        "z_seam_type": {
            "default_value": "shortest"
        },
        "infill_before_walls": {
            "default_value": false
        },
        "infill_sparse_density": {
            "default_value": 15
        },
        "fill_outline_gaps": {
            "default_value": false
        },
        "filter_out_tiny_gaps": {
            "default_value": false
        },
        "retraction_hop": {
            "default_value": 0.2
        },
        "travel_avoid_other_parts": {
            "default_value": false
        },
        "travel_retract_before_outer_wall": {
            "default_value": true
        },
        "retraction_amount": {
            "default_value": 2
        },
        "retraction_enable": {
            "default_value": true
        },
        "retraction_count_max": {
            "default_value": 100
        },
        "cool_fan_enabled": {
            "default_value": true
        },
        "cool_min_layer_time": {
            "default_value": 10
        },
        "skirt_gap": {
            "default_value": 8.0
        },
        "skirt_line_count": {
            "default_value": 3
        },
        "adaptive_layer_height_variation": {
            "default_value": 0.04
        },
        "adaptive_layer_height_variation_step": {
            "default_value": 0.04
        },
        "support_use_towers": {
            "default_value": false
        },
        "support_interface_enable": {
            "default_value": true
        },
        "support_interface_density": {
            "default_value": 33.333
        },
        "support_interface_pattern": {
            "default_value": "grid"
        },
        "support_interface_skip_height": {
            "default_value": 0.24
        },
        "top_bottom_thickness": {
            "default_value": 0.8
        },
        "material_flow": {
            "default_value": 100
        },
        "material_print_temperature": {
            "maximum_value_warning": "330"
        },
        "acceleration_roofing": {
            "enabled": "acceleration_enabled and roofing_layer_count > 0 and top_layers > 0"
        },
        "retraction_speed": {
            "default_value": 40,
            "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
            "maximum_value": "200"
        },
        "retraction_retract_speed": {
            "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
            "maximum_value": "200"
        },
        "retraction_prime_speed": {
            "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
            "maximum_value": "200"
        },
        "speed_layer_0": {
            "value": "speed_print / 2"
        },
        "acceleration_travel_layer_0": {
            "value": "acceleration_travel"
        },
        "jerk_travel": {
            "value": "jerk_print"
        },
        "jerk_travel_layer_0": {
            "value": "jerk_travel"
        },
        "skirt_brim_speed": {
            "value": "speed_layer_0"
        },
        "speed_infill": {
            "value": "speed_print"
        },
        "speed_wall": {
            "value": "speed_print / 2"
        },
        "speed_wall_0": {
            "value": "speed_wall"
        },
        "speed_wall_x": {
            "value": "speed_wall"
        },
        "speed_topbottom": {
            "value": "speed_print / 2"
        },
        "speed_roofing": {
            "value": "speed_topbottom"
        },
        "speed_travel": {
            "value": "150.0 if speed_print < 60 else 250.0 if speed_print > 100 else speed_print * 2.5"
        },
        "speed_print_layer_0": {
            "value": "speed_layer_0"
        },
        "speed_travel_layer_0": {
            "value": "100 if speed_layer_0 < 20 else 150 if speed_layer_0 > 30 else speed_layer_0 * 5"
        },
        "speed_prime_tower": {
            "value": "speed_topbottom"
        },
        "speed_support": {
            "value": "speed_wall_0"
        },
        "speed_support_interface": {
            "value": "speed_topbottom"
        },
        "material_initial_print_temperature": {
            "value": "material_print_temperature"
        },
        "material_final_print_temperature": {
            "value": "material_print_temperature"
        },
        "cool_fan_full_at_height": {
            "value": "layer_height_0 + 2 * layer_height"
        },
        "adhesion_type": {
            "default_value": "skirt"
        },
        "meshfix_maximum_travel_resolution": {
            "value": "meshfix_maximum_resolution"
        },
        "support_xy_distance": {
            "value": "wall_line_width_0 * 2"
        },
        "support_xy_distance_overhang": {
            "value": "wall_line_width_0"
        },
        "support_z_distance": {
            "value": "layer_height if layer_height >= 0.16 else layer_height * 2"
        },
        "support_xy_overrides_z": {
            "default_value": "xy_overrides_z"
        },
        "support_interface_height": {
            "value": "layer_height * 4"
        },
        "wall_thickness": {
            "value": "line_width * 2"
        },
        "acceleration_travel": {
            "value": 1000
        },
        "line_width": { 
            "value": 0.4
        },
        "speed_z_hop": { 
            "default_value": 5 
        },
        "retraction_combing_max_distance": { 
            "default_value": 30 
        },
        "travel_avoid_supports": { 
            "default_value": true 
        },
        "brim_replaces_support": { 
            "default_value": false 
        },
        "support_brim_width": { 
            "default_value": 4 
        },
        "minimum_support_area": { 
            "default_value": 2 
        },
        "minimum_interface_area": { 
            "default_value": 10 
        },
        "support_wall_count": { 
            "value": 1 
        },
        "support_brim_enable": { 
            "value": false 
        },
        "retraction_combing": {
            "value": "all"
        },
        "retraction_extrusion_window": {
            "value": 10,
            "maximum_value_warning": "20"
        },
        "retraction_min_travel": {
            "value": 1.5
        },
        "infill_wipe_dist": {
            "value": 0.0
        },
        "skin_overlap": {
            "value": 10.0
        },
        "infill_overlap": {
            "value": 30.0
        },
        "wall_0_wipe_dist": {
            "value": 0.0
        }
    }
}