um_s5_aa0.4_tpu_0.1mm.inst.cfg 1.3 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647
  1. [general]
  2. definition = ultimaker_s5
  3. name = Fine
  4. version = 4
  5. [metadata]
  6. material = generic_tpu
  7. quality_type = normal
  8. setting_version = 21
  9. type = quality
  10. variant = AA 0.4
  11. weight = 0
  12. [values]
  13. brim_width = 8.75
  14. cool_min_temperature = =material_print_temperature - 10
  15. gradual_infill_step_height = =5 * layer_height
  16. infill_overlap = 0
  17. infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
  18. infill_sparse_density = 10
  19. infill_wipe_dist = 0.1
  20. machine_min_cool_heat_time_window = 15
  21. machine_nozzle_cool_down_speed = 0.5
  22. machine_nozzle_heat_up_speed = 2.5
  23. material_final_print_temperature = =material_print_temperature - 10
  24. material_flow = 106
  25. material_initial_print_temperature = =material_print_temperature
  26. multiple_mesh_overlap = 0
  27. prime_tower_wipe_enabled = True
  28. retraction_count_max = 15
  29. retraction_extra_prime_amount = 0.8
  30. retraction_hop_only_when_collides = True
  31. retraction_min_travel = =line_width * 2
  32. skin_line_width = =round(line_width / 0.8, 2)
  33. skin_overlap = 5
  34. speed_print = 25
  35. speed_topbottom = =math.ceil(speed_print * 0.8)
  36. speed_wall = =math.ceil(speed_print * 25 / 25)
  37. speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
  38. support_angle = 50
  39. switch_extruder_prime_speed = 15
  40. switch_extruder_retraction_amount = 20
  41. switch_extruder_retraction_speeds = 35
  42. top_bottom_thickness = 0.7
  43. travel_avoid_distance = 1.5
  44. wall_0_inset = 0