liquid_vo0.4_PP_Fast_Print.inst.cfg 1.8 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263
  1. [general]
  2. definition = liquid
  3. name = Normal
  4. version = 4
  5. [metadata]
  6. material = generic_pp
  7. quality_type = fast
  8. setting_version = 21
  9. type = quality
  10. variant = VO 0.4
  11. weight = -1
  12. [values]
  13. acceleration_enabled = True
  14. acceleration_print = 4000
  15. brim_width = 20
  16. cool_fan_speed_max = 100
  17. cool_min_layer_time = 7
  18. cool_min_layer_time_fan_speed_max = 7
  19. cool_min_speed = 2.5
  20. infill_line_width = =round(line_width * 0.38 / 0.38, 2)
  21. infill_overlap = 0
  22. infill_pattern = tetrahedral
  23. infill_wipe_dist = 0.1
  24. jerk_enabled = True
  25. jerk_print = 15
  26. line_width = =machine_nozzle_size * 0.95
  27. machine_min_cool_heat_time_window = 15
  28. machine_nozzle_cool_down_speed = 0.85
  29. machine_nozzle_heat_up_speed = 1.5
  30. material_bed_temperature_layer_0 = =material_bed_temperature + 5
  31. material_final_print_temperature = =material_print_temperature - 12
  32. material_initial_print_temperature = =material_print_temperature - 2
  33. material_print_temperature = =default_material_print_temperature - 13
  34. material_print_temperature_layer_0 = =material_print_temperature + 3
  35. material_standby_temperature = 100
  36. multiple_mesh_overlap = 0
  37. prime_tower_enable = False
  38. prime_tower_size = 16
  39. prime_tower_wipe_enabled = True
  40. retraction_count_max = 12
  41. retraction_extra_prime_amount = 0.8
  42. retraction_extrusion_window = 1
  43. retraction_hop = 2
  44. retraction_hop_only_when_collides = True
  45. retraction_min_travel = 0.8
  46. retraction_prime_speed = 18
  47. speed_layer_0 = =math.ceil(speed_print * 15 / 25)
  48. speed_print = 25
  49. speed_topbottom = =math.ceil(speed_print * 25 / 25)
  50. speed_travel_layer_0 = 50
  51. speed_wall = =math.ceil(speed_print * 25 / 25)
  52. speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
  53. support_angle = 50
  54. switch_extruder_prime_speed = 15
  55. switch_extruder_retraction_amount = 20
  56. switch_extruder_retraction_speeds = 35
  57. top_bottom_thickness = 1.1
  58. wall_0_inset = 0
  59. wall_line_width_x = =line_width
  60. wall_thickness = =line_width * 3