cartesio_0.4_arnitel2045_normal.inst.cfg 1.5 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051
  1. [general]
  2. definition = cartesio
  3. name = Normal
  4. version = 4
  5. [metadata]
  6. material = dsm_arnitel2045_175
  7. quality_type = normal
  8. setting_version = 21
  9. type = quality
  10. variant = 0.4mm thermoplastic extruder
  11. weight = 0
  12. [values]
  13. acceleration_enabled = True
  14. acceleration_print = 100
  15. coasting_enable = True
  16. coasting_min_volume = 0.17
  17. coasting_speed = 90
  18. coasting_volume = 0.1
  19. cool_min_layer_time = 20
  20. cool_min_layer_time_fan_speed_max = =cool_min_layer_time
  21. infill_line_width = 0.5
  22. infill_pattern = grid
  23. infill_sparse_density = 40
  24. jerk_enabled = True
  25. jerk_print = 5
  26. material_final_print_temperature = =material_print_temperature
  27. material_initial_print_temperature = =material_print_temperature_layer_0 + 5
  28. material_print_temperature_layer_0 = =material_print_temperature + 5
  29. retraction_hop = 1
  30. retraction_hop_enabled = True
  31. retraction_min_travel = =round(line_width * 10)
  32. retraction_prime_speed = 2
  33. skirt_brim_minimal_length = 50
  34. speed_infill = =speed_print
  35. speed_layer_0 = =round(speed_print / 5 * 4)
  36. speed_print = 25
  37. speed_support_interface = =speed_topbottom
  38. speed_topbottom = =round(speed_print / 5 * 4)
  39. speed_travel = =round(speed_print if magic_spiralize else 150)
  40. speed_travel_layer_0 = =speed_travel
  41. speed_wall = =round(speed_print / 2)
  42. speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3)
  43. switch_extruder_prime_speed = =retraction_prime_speed
  44. switch_extruder_retraction_amount = 2
  45. switch_extruder_retraction_speeds = =retraction_speed
  46. top_bottom_thickness = 0.8
  47. wall_0_inset = -0.05
  48. wall_thickness = 1.2