| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566 |
- [general]
- name = BB 0.8
- version = 4
- definition = ultimaker3_extended
- [metadata]
- setting_version = 20
- type = variant
- hardware_type = nozzle
- [values]
- acceleration_enabled = True
- acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 3500)
- acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
- acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000)
- acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500)
- brim_width = 3
- cool_fan_speed = 50
- cool_min_speed = 5
- infill_overlap = 0
- infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
- infill_wipe_dist = 0
- jerk_print = 25
- layer_height = 0.2
- machine_min_cool_heat_time_window = 15
- machine_nozzle_heat_up_speed = 1.5
- machine_nozzle_id = BB 0.8
- machine_nozzle_size = 0.8
- machine_nozzle_tip_outer_diameter = 2.0
- material_print_temperature = =default_material_print_temperature + 10
- material_standby_temperature = 100
- multiple_mesh_overlap = 0
- prime_tower_enable = False
- prime_tower_wipe_enabled = True
- raft_acceleration = =acceleration_layer_0
- raft_airgap = 0
- raft_base_speed = 20
- raft_base_thickness = 0.3
- raft_interface_line_spacing = 0.5
- raft_interface_line_width = 0.5
- raft_interface_speed = 20
- raft_interface_thickness = 0.2
- raft_margin = 10
- raft_speed = 25
- raft_surface_layers = 1
- retraction_amount = 4.5
- retraction_hop = 2
- retraction_hop_only_when_collides = True
- retraction_min_travel = =line_width * 3
- retraction_prime_speed = 15
- skin_overlap = 5
- speed_layer_0 = 20
- speed_prime_tower = =math.ceil(speed_print * 7 / 35)
- speed_print = 35
- speed_support = =math.ceil(speed_print * 25 / 35)
- speed_support_interface = =math.ceil(speed_support * 20 / 25)
- speed_support_bottom = =math.ceil(speed_support_interface * 10 / 20)
- speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
- support_angle = 60
- support_bottom_height = =layer_height * 2
- support_interface_enable = True
- support_z_distance = 0
- switch_extruder_prime_speed = 15
- switch_extruder_retraction_amount = 12
- top_bottom_thickness = 1
- wall_0_inset = 0
|
