um3_aa0.25_PC_Normal_Quality.inst.cfg 1.2 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647
  1. [general]
  2. version = 4
  3. name = Fine - Experimental
  4. definition = ultimaker3
  5. [metadata]
  6. setting_version = 20
  7. type = quality
  8. quality_type = normal
  9. weight = 0
  10. material = generic_pc
  11. variant = AA 0.25
  12. is_experimental = True
  13. [values]
  14. adhesion_type = brim
  15. brim_width = 20
  16. cool_fan_full_at_height = =layer_height_0 + layer_height
  17. cool_fan_speed_max = 50
  18. cool_min_layer_time_fan_speed_max = 5
  19. cool_min_speed = 5
  20. infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
  21. infill_wipe_dist = 0.1
  22. jerk_print = 25
  23. machine_min_cool_heat_time_window = 15
  24. multiple_mesh_overlap = 0
  25. ooze_shield_angle = 40
  26. prime_tower_enable = True
  27. prime_tower_wipe_enabled = True
  28. raft_airgap = 0.25
  29. raft_interface_thickness = =max(layer_height * 1.5, 0.225)
  30. retraction_hop = 2
  31. retraction_hop_only_when_collides = True
  32. retraction_min_travel = 0.8
  33. retraction_prime_speed = 15
  34. skin_overlap = 30
  35. speed_layer_0 = =math.ceil(speed_print * 25 / 50)
  36. speed_print = 50
  37. speed_topbottom = =math.ceil(speed_print * 25 / 50)
  38. speed_travel = 250
  39. speed_wall = =math.ceil(speed_print * 40 / 50)
  40. speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
  41. support_interface_density = 87.5
  42. switch_extruder_prime_speed = 15
  43. switch_extruder_retraction_amount = 20
  44. switch_extruder_retraction_speeds = 35
  45. wall_0_inset = 0