um2p_pp_0.8_draft.inst.cfg 1.6 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253
  1. [general]
  2. version = 4
  3. name = Fast
  4. definition = ultimaker2_plus
  5. [metadata]
  6. setting_version = 20
  7. type = quality
  8. quality_type = draft
  9. weight = -2
  10. material = generic_pp
  11. variant = 0.8 mm
  12. [values]
  13. acceleration_enabled = True
  14. acceleration_layer_0 = =acceleration_topbottom
  15. acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
  16. acceleration_print = 4000
  17. acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
  18. acceleration_support_interface = =acceleration_topbottom
  19. acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
  20. acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
  21. acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
  22. brim_width = 20
  23. cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
  24. cool_fan_speed_max = 100
  25. cool_min_layer_time_fan_speed_max = 6
  26. cool_min_speed = 20
  27. infill_overlap = 0
  28. infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
  29. infill_wipe_dist = 0
  30. multiple_mesh_overlap = 0
  31. retraction_count_max = 15
  32. retraction_hop = 0.15
  33. retraction_hop_enabled = True
  34. retraction_hop_only_when_collides = True
  35. retraction_prime_speed = 15
  36. skin_overlap = 10
  37. speed_layer_0 = =speed_print
  38. speed_prime_tower = =speed_topbottom
  39. speed_print = 25
  40. speed_support_interface = =speed_topbottom
  41. speed_topbottom = =math.ceil(speed_print * 25 / 25)
  42. speed_travel = 250
  43. speed_travel_layer_0 = 50
  44. speed_wall = =math.ceil(speed_print * 25 / 25)
  45. speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
  46. support_angle = 60
  47. support_z_distance = =layer_height * 2
  48. support_bottom_distance = =support_z_distance / 2
  49. top_bottom_thickness = 1.5
  50. travel_avoid_distance = 3
  51. wall_0_inset = 0