um2p_cpep_0.8_draft.inst.cfg 924 B

1234567891011121314151617181920212223242526272829303132333435363738
  1. [general]
  2. version = 4
  3. name = Fast
  4. definition = ultimaker2_plus
  5. [metadata]
  6. setting_version = 20
  7. type = quality
  8. quality_type = slightlycoarse
  9. weight = -2
  10. material = generic_cpe_plus
  11. variant = 0.8 mm
  12. [values]
  13. adhesion_type = raft
  14. brim_line_count = 10
  15. cool_fan_speed = 50
  16. cool_fan_speed_min = =cool_fan_speed * 25 / 50
  17. cool_min_layer_time = 3
  18. infill_overlap = =0 if infill_sparse_density > 80 else 5
  19. infill_sparse_density = 40
  20. layer_0_z_overlap = 0.22
  21. raft_airgap = 0.37
  22. raft_base_line_width = 1.6
  23. raft_interface_line_spacing = 1.8
  24. raft_interface_line_width = 1.6
  25. raft_margin = 15
  26. raft_surface_line_width = 0.7
  27. raft_surface_thickness = 0.2
  28. speed_layer_0 = =round(speed_print * 30 / 25)
  29. speed_print = 25
  30. speed_topbottom = =math.ceil(speed_print * 20 / 25)
  31. speed_wall_0 = =math.ceil(speed_print * 20 / 25)
  32. speed_wall_x = =speed_print
  33. support_angle = 45
  34. support_enable = True
  35. support_z_distance = 0.26
  36. top_bottom_thickness = 1.2