s3d_std0.8_PC_D.inst.cfg 1.7 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061
  1. [general]
  2. version = 4
  3. name = D
  4. definition = strateo3d
  5. [metadata]
  6. setting_version = 20
  7. type = quality
  8. quality_type = d
  9. weight = 0
  10. material = emotiontech_pc
  11. variant = Standard 0.8
  12. [values]
  13. layer_height_0 = =round(0.67*machine_nozzle_size, 2)
  14. line_width = =machine_nozzle_size/machine_nozzle_size*0.8
  15. wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.75
  16. wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.75
  17. wall_0_wipe_dist = =machine_nozzle_size/2
  18. wall_line_count = 2
  19. speed_print = 50
  20. speed_wall = =math.ceil(speed_print * 40/50)
  21. speed_wall_0 = =math.ceil(speed_wall * 30/40)
  22. speed_topbottom = =math.ceil(speed_print * 35/50)
  23. speed_layer_0 = =math.ceil(speed_print * 25/50)
  24. speed_slowdown_layers = 2
  25. cool_fan_enabled = True
  26. cool_fan_speed = 50
  27. cool_fan_speed_max = 50
  28. cool_min_layer_time_fan_speed_max = 20
  29. cool_min_layer_time = 3
  30. cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
  31. cool_min_speed = 12
  32. cool_lift_head = True
  33. support_angle = 60
  34. material_print_temperature = 280
  35. material_print_temperature_layer_0 = 285
  36. material_flow = 89
  37. retraction_extra_prime_amount = 0.5
  38. retraction_min_travel = =2*line_width
  39. retraction_speed = 35
  40. skin_overlap = 5
  41. support_z_distance = =layer_height
  42. support_bottom_distance = =support_z_distance*0.5
  43. support_xy_distance = =line_width * 1.7
  44. support_xy_distance_overhang = =wall_line_width_0
  45. support_offset = 1
  46. support_interface_density = 100
  47. prime_tower_enable = True
  48. bridge_settings_enabled = True
  49. bridge_wall_coast = 50
  50. bridge_wall_speed = 12
  51. bridge_wall_material_flow = 50
  52. bridge_skin_speed = 12
  53. bridge_skin_material_flow = 60
  54. bridge_skin_density = 80
  55. bridge_fan_speed = 100
  56. meshfix_maximum_resolution = 0.5
  57. meshfix_maximum_deviation = 0.04