s3d_ht0.4_PC_A.inst.cfg 1.7 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061
  1. [general]
  2. version = 4
  3. name = A
  4. definition = strateo3d
  5. [metadata]
  6. setting_version = 20
  7. type = quality
  8. quality_type = a
  9. weight = 1
  10. material = emotiontech_pc
  11. variant = High temp 0.4
  12. [values]
  13. layer_height_0 = =round(0.5*machine_nozzle_size, 2)
  14. line_width = =machine_nozzle_size/machine_nozzle_size*0.4
  15. wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
  16. wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
  17. wall_0_wipe_dist = =machine_nozzle_size/2
  18. speed_print = 35
  19. speed_wall = =math.ceil(speed_print * 35/50)
  20. speed_wall_0 = =math.ceil(speed_wall * 30/35)
  21. speed_topbottom = =math.ceil(speed_print * 35/50)
  22. speed_layer_0 = =math.ceil(speed_print * 20/50)
  23. speed_slowdown_layers = 2
  24. cool_fan_enabled = True
  25. cool_fan_speed = 10
  26. cool_fan_speed_max = 10
  27. cool_min_layer_time_fan_speed_max = 20
  28. cool_min_layer_time = 2
  29. cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
  30. cool_min_speed = 12
  31. support_angle = 60
  32. cool_lift_head = true
  33. material_print_temperature = 260
  34. material_print_temperature_layer_0 = 265
  35. material_flow = 88
  36. wall_line_count = 3
  37. retraction_extra_prime_amount = 0.1
  38. retraction_speed = 30
  39. retraction_min_travel = =3*line_width
  40. retraction_hop_only_when_collides = True
  41. skin_overlap = 10
  42. support_z_distance = =layer_height
  43. support_bottom_distance = =support_z_distance*0.5
  44. support_xy_distance = =line_width * 1.7
  45. support_xy_distance_overhang = =wall_line_width_0
  46. support_offset = 1
  47. support_interface_density = 100
  48. prime_tower_enable = True
  49. adhesion_type = brim
  50. bridge_settings_enabled = True
  51. bridge_wall_coast = 50
  52. bridge_wall_speed = 12
  53. bridge_wall_material_flow = 50
  54. bridge_skin_speed = 12.5
  55. bridge_skin_material_flow = 100
  56. bridge_skin_density = 80
  57. bridge_fan_speed = 100