s3d_ht0.4_ABS-X_B.inst.cfg 1.5 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647
  1. [general]
  2. version = 4
  3. name = B
  4. definition = strateo3d
  5. [metadata]
  6. setting_version = 20
  7. type = quality
  8. quality_type = b
  9. weight = 0
  10. material = emotiontech_absx
  11. variant = High temp 0.4
  12. [values]
  13. layer_height_0 = =round(0.67*machine_nozzle_size, 2)
  14. line_width = =machine_nozzle_size/machine_nozzle_size*0.4
  15. wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
  16. wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
  17. wall_0_wipe_dist = =machine_nozzle_size/2
  18. speed_print = 55
  19. speed_wall = =math.ceil(speed_print * 37/55)
  20. speed_wall_0 = =math.ceil(speed_wall * 33/37)
  21. speed_topbottom = =math.ceil(speed_print * 37/55)
  22. speed_layer_0 = =math.ceil(speed_print * 25/55)
  23. speed_slowdown_layers = 2
  24. cool_fan_enabled = True
  25. cool_fan_speed = 35
  26. cool_fan_speed_max = 100
  27. cool_min_layer_time_fan_speed_max = 20
  28. cool_min_layer_time = 11
  29. cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
  30. cool_min_speed = 10
  31. support_angle = 60
  32. material_print_temperature = =default_material_print_temperature + 5
  33. material_print_temperature_layer_0 = =default_material_print_temperature + 3
  34. material_flow = 96
  35. retraction_extra_prime_amount = 0.1
  36. retraction_min_travel = =3*line_width
  37. retraction_hop_only_when_collides = True
  38. skin_overlap = 15
  39. support_z_distance = =layer_height
  40. support_bottom_distance = =support_z_distance
  41. support_xy_distance = =line_width * 1.7
  42. support_xy_distance_overhang = =wall_line_width_0
  43. support_offset = 1
  44. support_interface_density = 100
  45. prime_tower_enable = True