| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162 |
- {
- "version": 2,
- "name": "Eryone ER20",
- "inherits": "fdmprinter",
- "metadata": {
- "visible": true,
- "author": "Eryone3d",
- "manufacturer": "Eryone",
- "file_formats": "text/x-gcode",
- "platform": "eryone_er20_plateform.stl",
- "has_machine_quality": true,
- "preferred_quality_type": "high",
- "machine_extruder_trains":
- {
- "0": "eryone_er20_extruder_0"
- }
- },
- "overrides": {
- "machine_name": { "default_value": "Eryone ER20" },
- "machine_heated_bed": { "default_value": true },
- "machine_width": { "default_value": 250 },
- "machine_height": { "default_value": 200 },
- "machine_depth": { "default_value": 220 },
- "machine_center_is_zero": { "default_value": false },
- "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
- "machine_head_with_fans_polygon": {
- "default_value": [
- [-10, -10],
- [-10, 10],
- [10, 10],
- [10, -10]
- ]
- },
- "gantry_height":{ "value": "0" },
- "machine_start_gcode": {
- "default_value": "G90 ; use absolute coordinates\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling/ABL\nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0.0\nG1 Y-2.0 X150 F2400G1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 X150 F1000\nG1 Z0.2 F720\nG1 X80.0 E8.0 F900\nG1 X20.0 E10.0 F700\nG92 E0.0\nM221 S95 ; set flow\n"
- },
- "machine_end_gcode": {
- "default_value": "M104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors\nM107\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 ;Y0 ;move X/Y to min endstops, so the head is out of the way\nG1 Y180 F2000\nM84 ;steppers off\nG90\nM300 P300 S4000"
- }
- }
- }
|
