{
    "version": 2,
    "name": "HMS434",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": true,
        "author": "Scheepers",
        "manufacturer": "Hybrid AM Systems",
        "file_formats": "text/x-gcode",
        "platform": "hms_platform.obj",
        "exclude_materials": [
            "dsm_arnitel2045",
            "dsm_novamid1070",
            "generic_abs",
            "generic_cpe",
            "generic_hips",
            "generic_nylon",
            "generic_pc",
            "generic_petg",
            "generic_pva",
            "generic_tpu",
            "imade3d_petg",
            "imade3d_pla",
            "innofill_innoflex60",
            "verbatim_bvoh"
        ],
        "first_start_actions": [ "MachineSettingsAction" ],
        "has_machine_quality": true,
        "has_materials": true,
        "has_variants": true,
        "machine_extruder_trains":
        {
            "0": "hms434_tool_1",
            "1": "hms434_tool_2",
            "2": "hms434_tool_3",
            "3": "hms434_tool_4",
            "4": "hms434_tool_5",
            "5": "hms434_tool_6",
            "6": "hms434_tool_7",
            "7": "hms434_tool_8"
        },
        "platform_offset": [
            26,
            -13.2,
            162.5
        ],
        "platform_texture": "hms434.png",
        "preferred_quality_type": "high",
        "preferred_variant_name": "0.4mm TP extruder",
        "supported_actions": [ "MachineSettingsAction" ],
        "variants_name": "Tool"
    },
    "overrides":
    {
        "acceleration_print": { "value": 1000 },
        "acceleration_travel": { "value": 1000 },
        "adhesion_type": { "value": "'brim'" },
        "alternate_extra_perimeter": { "value": false },
        "bottom_layers": { "value": "(top_layers)" },
        "bridge_fan_speed": { "value": 0 },
        "bridge_settings_enabled": { "value": true },
        "bridge_skin_density_2": { "value": 100 },
        "bridge_skin_density_3": { "value": 100 },
        "bridge_skin_material_flow": { "value": 130 },
        "bridge_skin_material_flow_2": { "value": 110 },
        "bridge_skin_material_flow_3": { "value": 100 },
        "bridge_skin_speed": { "value": 15 },
        "bridge_skin_speed_2": { "value": 20 },
        "bridge_skin_speed_3": { "value": 30 },
        "bridge_skin_support_threshold": { "value": 90 },
        "bridge_wall_material_flow": { "value": 130 },
        "bridge_wall_min_length": { "value": 3 },
        "bridge_wall_speed": { "value": 15 },
        "coasting_enable": { "value": false },
        "coasting_min_volume": { "value": 0.17 },
        "coasting_speed": { "value": 90 },
        "coasting_volume": { "value": 0.1 },
        "cool_fan_enabled": { "value": true },
        "cool_fan_speed": { "value": 0 },
        "cool_lift_head": { "value": false },
        "cool_min_layer_time": { "value": 30 },
        "cool_min_layer_time_fan_speed_max": { "value": "cool_min_layer_time" },
        "cool_min_speed": { "value": "5" },
        "default_material_print_temperature": { "maximum_value": "401" },
        "fill_outline_gaps": { "value": true },
        "gantry_height": { "value": "35" },
        "infill_before_walls": { "value": true },
        "infill_pattern": { "value": "'lines'" },
        "infill_sparse_density": { "value": 100 },
        "initial_layer_line_width_factor": { "value": 110 },
        "inset_direction": { "value": "'outside_in'" },
        "ironing_flow": { "value": "0" },
        "ironing_inset": { "value": "ironing_line_spacing + (ironing_line_spacing - skin_line_width * (1.0 + ironing_flow / 100) / 2 if ironing_pattern == 'concentric' else skin_line_width * (1.0 - ironing_flow / 100) / 2)" },
        "ironing_line_spacing": { "value": "line_width / 4 * 3" },
        "jerk_print": { "value": 10 },
        "jerk_travel": { "value": 10 },
        "layer_height": { "maximum_value": "(0.8 * min(extruderValues('machine_nozzle_size')))" },
        "layer_height_0": { "maximum_value": "(0.8 * min(extruderValues('machine_nozzle_size')))" },
        "machine_acceleration": { "default_value": 180 },
        "machine_center_is_zero": { "default_value": false },
        "machine_depth": { "default_value": 325 },
        "machine_end_gcode": { "default_value": "" },
        "machine_extruder_count": { "default_value": 2 },
        "machine_gcode_flavor": { "default_value": "RepRap (RepRap)" },
        "machine_heated_bed": { "default_value": true },
        "machine_heated_build_volume": { "default_value": true },
        "machine_height": { "default_value": 400 },
        "machine_max_feedrate_z": { "default_value": 10 },
        "machine_min_cool_heat_time_window": { "default_value": 5 },
        "machine_nozzle_cool_down_speed": { "default_value": 20 },
        "machine_nozzle_heat_up_speed": { "default_value": 12 },
        "machine_start_gcode": { "default_value": "\n;Neither Hybrid AM Systems nor any of Hybrid AM Systems representatives has any liabilities or gives any warranties on this .gcode file, or on any or all objects made with this .gcode file.\n\nM114\n\nM140 S{material_bed_temperature_layer_0}\nM118 // action:chamber_fan_on\nM141 S{build_volume_temperature}\n\nM117 Homing Y ......\nG28 Y\nM117 Homing X ......\nG28 X\nM117 Homing Z ......\nG28 Z F100\n\nG1 Z10 F900\nG1 X-25 Y20 F12000\n\nM190 S{material_bed_temperature_layer_0}\n\nM117 HMS434 Printing ..." },
        "machine_width": { "default_value": 450 },
        "material_bed_temp_wait": { "default_value": false },
        "material_bed_temperature_layer_0": { "value": "material_bed_temperature" },
        "material_break_preparation_temperature": { "maximum_value": "401" },
        "material_diameter": { "default_value": 1.75 },
        "material_final_print_temperature":
        {
            "maximum_value": "401",
            "value": "material_print_temperature"
        },
        "material_flow_layer_0": { "value": "material_flow" },
        "material_initial_print_temperature":
        {
            "maximum_value": "401",
            "maximum_value_warning": "material_print_temperature + 15",
            "value": "material_print_temperature"
        },
        "material_print_temp_wait": { "default_value": false },
        "material_print_temperature": { "maximum_value": "401" },
        "material_print_temperature_layer_0": { "maximum_value": "401" },
        "meshfix_maximum_deviation": { "value": 0.005 },
        "meshfix_maximum_resolution": { "value": 0.01 },
        "meshfix_maximum_travel_resolution": { "value": 0.1 },
        "minimum_polygon_circumference": { "value": 0.05 },
        "optimize_wall_printing_order": { "default_value": true },
        "prime_blob_enable": { "default_value": false },
        "prime_tower_position_x": { "value": 125 },
        "prime_tower_position_y": { "value": 70 },
        "prime_tower_size": { "value": 20.6 },
        "retract_at_layer_change": { "value": false },
        "retraction_combing": { "value": "'off'" },
        "retraction_enable": { "value": true },
        "retraction_extra_prime_amount": { "minimum_value_warning": "-2.0" },
        "retraction_hop": { "value": 1 },
        "retraction_hop_enabled": { "value": false },
        "retraction_min_travel": { "value": "(round(line_width * 10))" },
        "roofing_layer_count": { "value": "0" },
        "skin_outline_count": { "value": "0" },
        "skirt_brim_minimal_length": { "value": 50 },
        "skirt_gap": { "value": 1 },
        "speed_ironing": { "value": "150" },
        "speed_layer_0": { "value": "(speed_print / 5 * 4) if speed_print > 45 else speed_print" },
        "speed_print": { "value": "50" },
        "speed_slowdown_layers": { "value": 1 },
        "speed_support_interface": { "value": "speed_topbottom" },
        "speed_topbottom": { "value": "speed_layer_0" },
        "speed_travel": { "value": "250" },
        "speed_travel_layer_0": { "value": "speed_travel" },
        "speed_wall": { "value": "(speed_print/ 5 * 3) if speed_print > 45 else speed_print" },
        "speed_wall_x": { "value": "speed_wall" },
        "speed_z_hop": { "value": 10 },
        "support_bottom_height": { "value": "layer_height" },
        "support_infill_rate": { "value": 30 },
        "support_interface_enable": { "value": true },
        "support_interface_height": { "value": "layer_height * 3" },
        "support_interface_pattern": { "value": "'lines'" },
        "support_join_distance": { "value": 10 },
        "support_pattern": { "value": "'grid'" },
        "support_roof_pattern": { "value": "'concentric'" },
        "support_xy_distance": { "value": 0.4 },
        "support_z_distance": { "value": 0 },
        "switch_extruder_prime_speed": { "value": "(retraction_prime_speed)" },
        "switch_extruder_retraction_speeds": { "value": "(retraction_speed)" },
        "top_bottom_thickness": { "value": "(layer_height_0 + (layer_height * (top_layers - 1)))" },
        "top_layers": { "value": "4 if infill_sparse_density < 95 else 1" },
        "wall_0_inset": { "value": "0" },
        "wall_overhang_angle": { "value": 60 },
        "wall_thickness": { "value": "(line_width * 3) if infill_sparse_density < 95 else line_width" },
        "z_seam_corner": { "value": "'z_seam_corner_inner'" },
        "z_seam_type": { "value": "'shortest'" },
        "z_seam_x": { "value": "300" },
        "z_seam_y": { "value": "325" }
    }
}