{
    "name": "Creality Ender-6",
    "version": 2,
    "inherits": "creality_base",
    "overrides": {
        "machine_name": { "default_value": "Creality Ender-6" },
        "machine_start_gcode": { "default_value": "\nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n"},
        "machine_end_gcode": { "default_value": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG28 X Y ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },
        "machine_width": { "default_value": 260 },
        "machine_depth": { "default_value": 260 },
        "machine_height": { "default_value": 400 },
        "z_seam_type": { "value": "'sharpest_corner'"},
        "z_seam_corner": { "value": "'z_seam_corner_inner'"},
        "infill_sparse_density": { "value": "10"},
        "infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'grid'"},
        "infill_overlap":{"value": 10},    
        "material_print_temperature":{"value": 220},
        "material_bed_temperature":{"value": 50},
        "retraction_amount":{"value": 10},  
        "speed_travel": { "value": 80.0 },
        "coasting_enable": { "value": true},
        "coasting_min_volume": { "value": 0.5},
        "machine_head_with_fans_polygon": { "default_value": [
                [-26, 34],
                [-26, -32],
                [32, -32],
                [32, 34]
            ]
        },

        "gantry_height": { "value": 25 },

        "speed_print": { "value": 50.0 },
        "speed_wall": { "value": 30.0 }

    },
    "metadata": {
        "quality_definition": "creality_base",
        "visible": true
    }
}