{
    "version": 2,
    "name": "WEEDO X40 V3+",
    "inherits": "weedo_base",
    "metadata":
    {
        "visible": true,
        "author": "WEEDO",
        "manufacturer": "WEEDO",
        "file_formats": "text/x-gcode",
        "machine_extruder_trains":
        {
            "0": "weedo_x40v3_extruder_left",
            "1": "weedo_x40v3_extruder_right"
        },
        "platform_offset": [
            0,
            0,
            0
        ]
    },
    "overrides":
    {
        "adhesion_type": { "default_value": "brim" },
        "machine_always_write_active_tool": { "default_value": true },
        "machine_depth": { "default_value": 300 },
        "machine_end_gcode": { "default_value": ";(*********end X40 End.gcode*******)\nM203 Z15\nM605 S1 ;Set to auto-park\nG28 X F3000\nG91 ; Relative positioning\nG1 E-1 ; Reduce filament pressure\nG90\nG1 Y300 F3000\nM104 S0 T0\nM104 S0 T1\nM140 S0\nM107 P0\nM107 P1\nM82" },
        "machine_extruder_count": { "default_value": 2 },
        "machine_height": { "default_value": 400 },
        "machine_name": { "default_value": "WEEDO X40" },
        "machine_nozzle_heat_up_speed": { "default_value": 1.7 },
        "machine_start_gcode": { "default_value": ";MachineType:{machine_name}\n;FilamentType:{material_type}\n;InfillDensity:{infill_sparse_density}\n;BedTemperature:{material_bed_temperature}\n\n;(**** start.gcode for  X40 ****)\nM203 Z15\nM140 S{material_bed_temperature_layer_0}\nM104 S{material_print_temperature_layer_0} T{initial_extruder_nr}\nG28 ;This command will use tool0 to get the x endstop and setup coordinate system\nG29 ;Auto level\nM107 P0 ;Turn off fan\nM107 P1\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nG1 X-47 F3000\nG1 Z20 F600\nT{initial_extruder_nr} S ;Set start extruder nr after G28\nM109 S{material_print_temperature_layer_0} T{initial_extruder_nr}\nG92 E0\nG1 E22 F300\nG92 E0\nM203 Z2" },
        "machine_width": { "default_value": 300 },
        "material_print_temp_prepend": { "default_value": false },
        "material_standby_temperature": { "value": "max(0, material_print_temperature - 20)" },
        "ooze_shield_angle": { "default_value": 0 },
        "ooze_shield_dist": { "default_value": 3.0 },
        "ooze_shield_enabled": { "default_value": true },
        "retraction_amount": { "default_value": 4 },
        "speed_print": { "value": 60.0 },
        "speed_support": { "value": "round(speed_print * 0.96, 1)" },
        "speed_topbottom": { "value": "round(speed_print * 0.58, 1)" },
        "speed_wall": { "value": "speed_print / 2" },
        "switch_extruder_retraction_amount": { "value": 0 }
    }
}