{
    "version": 2,
    "name": "anet3d",
    "inherits": "fdmprinter",
    "metadata": {
        "author": "Tiger.He",
        "manufacturer": "Anet",
        "category": "anet3d",
        "visible": false,
        "file_formats": "text/x-gcode",
        "first_start_actions": ["MachineSettingsAction"],
        
        "preferred_variant_name": "0.4mm Nozzle",
        "preferred_quality_type": "standard",
        "preferred_material": "generic_pla",
        "machine_extruder_trains":
        {
            "0": "anet3d_extruder_0"
        }
    },
    "overrides": {
        "machine_max_feedrate_x": { "value": 500 },
        "machine_max_feedrate_y": { "value": 500 },
        "machine_max_feedrate_z": { "value": 10 },
        "machine_max_feedrate_e": { "value": 50 },

        "machine_max_acceleration_x": { "value": 500 },
        "machine_max_acceleration_y": { "value": 500 },
        "machine_max_acceleration_z": { "value": 100 },
        "machine_max_acceleration_e": { "value": 5000 },
        "machine_acceleration": { "value": 500 },

        "machine_max_jerk_xy": { "value": 10 },
        "machine_max_jerk_z": { "value": 0.4 },
        "machine_max_jerk_e": { "value": 5 },

        "machine_heated_bed": { "default_value": true },

        "material_diameter": { "default_value": 1.75 },

        "acceleration_print": { "value": 1000 },
        "acceleration_travel": { "value": 1000 },
        "acceleration_travel_layer_0": { "value": "acceleration_travel" },
        "acceleration_roofing": { "enabled": "acceleration_enabled and roofing_layer_count > 0 and top_layers > 0" },

        "jerk_print": { "value": 30.0 },
        "jerk_travel": { "value": "jerk_print" },
        "jerk_travel_layer_0": { "value": "jerk_travel" },

        "acceleration_enabled": { "value": true },
        "jerk_enabled": { "value": false },

        "speed_print": { "value": 50.0 } ,
        "speed_infill": { "value": "speed_print * 2" },
        "speed_wall": { "value": "speed_print / 2" },
        "speed_wall_0": { "value": "speed_wall" },
        "speed_wall_x": { "value": "speed_wall" },
        "speed_topbottom": { "value": "speed_print / 2" },
        "speed_roofing": { "value": "speed_topbottom" },
        "speed_travel": { "value": "150.0 if speed_print < 60 else 250.0 if speed_print > 100 else speed_print * 2.5" },
        "speed_layer_0": { "value": "speed_print / 2" },
        "speed_print_layer_0": { "value": "speed_layer_0" },
        "speed_travel_layer_0": { "value": "100 if speed_layer_0 < 20 else 150 if speed_layer_0 > 30 else speed_layer_0 * 5" },
        "speed_prime_tower": { "value": "speed_print" },
        "speed_support": { "value": "speed_print" },
        "speed_support_interface": { "value": "speed_print" },
        "speed_z_hop": { "value": 5 },

        "skirt_brim_speed": { "value": "speed_layer_0" },

        "line_width": { "value": "machine_nozzle_size" },

        "optimize_wall_printing_order": { "value": true },

        "material_initial_print_temperature": { "value": "material_print_temperature" },
        "material_final_print_temperature": { "value": "material_print_temperature" },
        "material_flow": { "value": 100 },
        "travel_compensate_overlapping_walls_0_enabled": { "value": "False" },

        "z_seam_type": { "value": "'back'" },
        "z_seam_corner": { "value": "'z_seam_corner_weighted'" },
        
        "infill_sparse_density": { "value": "20" },
        "infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'cubic'" },
        "infill_before_walls": { "value": true },
        "infill_overlap": { "value": 30.0 },
        "skin_overlap": { "value": 10.0 },
        "infill_wipe_dist": { "value": 1.0 },
        "wall_0_wipe_dist": { "value": 0.2 },

        "fill_perimeter_gaps": { "value": "'everywhere'" },
        "fill_outline_gaps": { "value": false },
        "filter_out_tiny_gaps": { "value": true },

        "retraction_speed": {
            "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
            "maximum_value": 200
        },
        "retraction_retract_speed": {
            "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
            "maximum_value": 200
        },
        "retraction_prime_speed": {
            "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
            "maximum_value": 200
        },
        
        "retraction_hop_enabled": { "value": "False" },
        "retraction_hop": { "value": 1 },
        "retraction_combing": { "value": "'off' if retraction_hop_enabled else 'noskin'" },
        "retraction_combing_max_distance": { "value": 30 },
        "travel_avoid_other_parts": { "value": true },
        "travel_avoid_supports": { "value": true },
        "travel_retract_before_outer_wall": { "value": true },
        
        "retraction_enable": { "value": true },
        "retraction_count_max": { "value": 100 },
        "retraction_extrusion_window": { "value": 10 },
        "retraction_min_travel": { "value": 1.5 },

        "cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" },
        "cool_fan_enabled": { "value": true },
        "cool_min_layer_time": { "value": 10 },

        "adaptive_layer_height_variation": { "value": 0.04 },
        "adaptive_layer_height_variation_step": { "value": 0.04 },

        "meshfix_maximum_resolution": { "value": "0.05" },
        "meshfix_maximum_travel_resolution": { "value": "meshfix_maximum_resolution" },

        "top_bottom_thickness": {"value":  "layer_height_0 + layer_height * 3" },
        "wall_thickness": {"value": "line_width * 2" },
        
        "material_print_temperature": {"minimum_value": "0"},
        "material_bed_temperature": {"minimum_value": "0"},
        "material_standby_temperature": {"minimum_value": "0"},
        
        "extruder_prime_pos_y":{"minimum_value": "0","maximum_value": "machine_depth"},
        "extruder_prime_pos_x":{"minimum_value": "0","maximum_value": "machine_width"},
        "relative_extrusion":{"value": false,"enabled": false},
        
        "machine_use_extruder_offset_to_offset_coords": {"default_value": true},
        "machine_gcode_flavor": {"default_value": "RepRap (Marlin/Sprinter)"},
        
        "machine_center_is_zero": {
            "default_value": false
        },
        "gantry_height": {
            "value": "0"
        }
    }
}