[general]
definition = dagoma_pro_430_bowden
name = Brass 0.4mm
version = 4

[metadata]
hardware_type = nozzle
setting_version = 23
type = variant

[values]
acceleration_enabled = True
acceleration_layer_0 = =acceleration_topbottom
acceleration_print = 1500
acceleration_print_layer_0 = =acceleration_layer_0
acceleration_skirt_brim = 3000
acceleration_travel = =acceleration_print
acceleration_travel_layer_0 = 2000.0
acceleration_wall = =math.ceil(acceleration_print * 1000 / 1250)
adhesion_type = skirt
bridge_fan_speed_2 = 100
bridge_fan_speed_3 = 100
bridge_settings_enabled = True
bridge_skin_density = 95.0
bridge_skin_density_2 = 85
bridge_skin_density_3 = 100
bridge_skin_speed_2 = 37.5
bridge_wall_min_length = 2.0
carve_multiple_volumes = True
coasting_enable = True
cool_fan_full_at_height = 0.6
cool_fan_speed_min = 100
cool_min_layer_time = 6.0
cool_min_speed = 5
expand_skins_expand_distance = 0.8
infill_line_distance = =0 if infill_sparse_density == 0 else (infill_line_width * 100) / infill_sparse_density * (2 if infill_pattern == 'grid' else (3 if infill_pattern == 'triangles' or infill_pattern == 'trihexagon' or infill_pattern == 'cubic' or infill_pattern == 'cubicsubdiv' else (2 if infill_pattern == 'tetrahedral' or infill_pattern == 'quarter_cubic' else (1 if infill_pattern == 'cross' or infill_pattern == 'cross_3d' else (1.6 if infill_pattern == 'lightning' else 1)))))
infill_overlap = 2
infill_pattern = grid
infill_sparse_density = 15
infill_sparse_thickness = 0.4
infill_wall_line_count = 1
infill_wipe_dist = 0.2
initial_layer_line_width_factor = 100
jerk_enabled = False
layer_height_0 = 0.25
line_width = =machine_nozzle_size
machine_nozzle_id = Brass 0.4mm
machine_nozzle_size = 0.4
material_bed_temperature = 50
material_bed_temperature_layer_0 = 80
material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
material_flow_layer_0 = 95
material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
material_print_temperature = =default_material_print_temperature + 5
meshfix_maximum_deviation = 0.025
meshfix_maximum_resolution = 1.5
meshfix_maximum_travel_resolution = 0.5
minimum_polygon_circumference = 0.4
multiple_mesh_overlap = 0.15
retract_at_layer_change = True
retraction_amount = 3.0
retraction_combing = noskin
retraction_combing_max_distance = 5.0
retraction_count_max = 25
retraction_extrusion_window = 1
retraction_hop = 0.0
retraction_hop_enabled = True
retraction_speed = 40
roofing_layer_count = 1
roofing_line_width = 0.3
roofing_material_flow = 95
skin_edge_support_thickness = 0.0
skin_monotonic = True
skin_no_small_gaps_heuristic = False
skin_outline_count = 2
skin_overlap = 5
skin_preshrink = 0.8
skirt_brim_speed = 35
skirt_gap = 2.0
skirt_line_count = 2
small_feature_speed_factor_0 = 35
small_hole_max_size = 4.0
speed_infill = 60
speed_layer_0 = 14
speed_slowdown_layers = 4
speed_support = 100
speed_travel = 180
speed_travel_layer_0 = 27
support_angle = 65
support_enable = False
support_fan_enable = True
support_infill_rate = 15
support_pattern = zigzag
support_structure = normal
support_top_distance = 0.1
support_type = buildplate
support_xy_distance = 1.5
support_xy_overrides_z = xy_overrides_z
top_bottom_thickness = 0.8
top_thickness = 0.8
travel_avoid_distance = 3
travel_avoid_supports = True
wall_line_count = 2
wall_thickness = =line_width * 2
z_seam_corner = z_seam_corner_inner
zig_zaggify_infill = False