[general] version = 4 name = B definition = strateo3d [metadata] setting_version = 16 type = quality quality_type = b weight = 0 material = emotiontech_pva-s variant = Standard 0.4 [values] layer_height_0 = =round(0.67*machine_nozzle_size, 2) line_width = =machine_nozzle_size/machine_nozzle_size*0.4 wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.4 wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.4 wall_0_wipe_dist = =machine_nozzle_size/2 speed_print = 40 speed_wall = =math.ceil(speed_print * 30/40) speed_wall_0 = =math.ceil(speed_wall * 30/40) speed_topbottom = =math.ceil(speed_print * 20/40) speed_layer_0 = =math.ceil(speed_print * 20/40) speed_slowdown_layers = 2 cool_fan_enabled = True cool_fan_speed = 50 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height cool_min_speed = 10 support_angle = 55 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature material_flow = 97 retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True skin_overlap = 15 support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 support_z_distance = =layer_height-layer_height support_bottom_distance = =support_z_distance support_xy_distance = =line_width * 0.5 support_xy_distance_overhang = =line_width*0 support_offset = 3 support_pattern = grid support_interface_density = 100 prime_tower_enable = True