{
    "version": 2,
    "name": "Creality Ender-5 S1",
    "inherits": "creality_base",
    "metadata":
    {
        "visible": true,
        "quality_definition": "creality_base"
    },
    "overrides":
    {
        "build_volume_temperature": { "value": 195 },
        "cool_min_layer_time": { "value": 5 },
        "gantry_height": { "value": 25 },
        "machine_depth": { "default_value": 225 },
        "machine_end_gcode": { "default_value": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG1 X0 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [-26, 34],
                [-26, -32],
                [32, -32],
                [32, 34]
            ]
        },
        "machine_height": { "default_value": 305 },
        "machine_name": { "default_value": "Creality Ender-5 S1" },
        "machine_width": { "default_value": 225 },
        "material_bed_temperature": { "value": 60 },
        "retraction_amount": { "value": 2 },
        "retraction_speed": { "value": 45 },
        "speed_print": { "value": 80.0 },
        "support_z_distance": { "value": 0.25 },
        "wall_thickness": { "value": "line_width * 3" },
        "z_seam_type": { "value": "'sharpest_corner'" }
    }
}